Page 15 - SNIRAQ Catalogue

‘NO TOOL’ CIRCUIT CIRCUIT BREAKER LOCKOUT
BREAKER LOCKOUTS
Operation
These lockouts install quickly and easily without any 1. Tighten set screw
tools. Featuring a compact universal design that fits 2. Rotate toggle
a wide variety of single, double and triple handle 3. Ready for padlock
circuit breakers, the ‘No Tool’ circuit breaker lockouts
are easily attached with no modifications to the
panel or circuit breaker.

To install, the user simply puts the circuit breaker
handle to the ‘off’ position, places the lockout over
the handle, tightens the set screw by hand, rotates
the toggle and applies a tag and padlock.

Grub Screw Version

A grub screw version (shown right) is also available
which is secured using a small flat Electrician’s
screwdriver. Universal

1. Locate over handle 2. Tighten grub screw 3. Lockout/Tagout Code Description

CB16 ‘No Tool’ circuit breaker lockout
CB16A Grub screw circuit breaker lockout

MERLIN GERIN POWERPACT 4C TOGGLE
PADLOCKING ATTACHMENT

This device locates in the slot behind the switch toggle when in the off position,
blocking its operation. Adding a padlock prevents unauthorized operation and
secures the device in place when the breaker is in the off position. Removable
toggle padlocking attachment locking in OFF position - Current rating 250A.

Compatible with Compact/FPower range

Small side: Large side:
NS80 NS/NSX400-630
NSX100-250 NSJ400-600
NSE75-100
NSF150-250

Code Description CIRCUIT BREAKER LOCKOUT
MG29370 Merlin Gerinn toggle attachment
15
T +964 (0)7811125188 email info@sniraq.com www.sniraq.com