Page 25 - 2018 DIGITAL BROCHURE

Application

General Concrete repairs least 2 minutes after adding the last
Place the material as quickly Carry out the removal of all loose of the LUL RAPIDESET powder and
as possible after mixing using material from concrete and the apply as previously recommended
traditional tools. A 2mm minimum reinforcement. It is only necessary ensuring that the LUL RAPIDESET
thickness of the material is to remove the loose rust from is worked around the reinforcement.
always necessary. Do not apply the reinforcement. Prepare the Protect the surface of the LUL
additional water to the surface surface as described previously RAPIDESET from direct sunlight or
during finishing as this may cause ensuring that the surface is well wind until setting has completed.
surface cracking. Once setting as dampened but ensuring there is no Once the LUL RAPIDESET has set
started DO NOT attempt to remix standing water. Fix any necessary allow at least 1 hour before applying
or to smooth the surface, this will replacement reinforcement, any finishes.
cause the properties in particular movement joints and formwork. Mix
strength and adhesion to be lost. the material by adding the dry LUL
RAPIDESET powder continuously to
the water ensuring it is mixed for at

Cut back loose and spalling concrete Wire brush any reinforcement to
a minimum depth of 2mm. remove any loose rust.

Well dampen the concrete with Mix LUL RAPIDESET as instructed
water ensuring no standing and place the mortar, ensuring
water. at all times a minimum thickness
of 2mm.