Page 20 - 2018 DIGITAL BROCHURE
P. 20
GROUT 105
Method of use Application
Preparing the surface Mixing General
Do not use on frozen or over To no more than 3.5 litres of Place the material as quickly
heated substrates (outside the clean water per bag, gradually as possible after mixing using
range of 0°c-30°c). Prepare the add whilst mixing the GROUT traditional tools. A 10mm
surface in advance to provide 105. If one bag or less is to be minimum thickness of the material
an adequate key. On glazed used it can be mixed with a rose is always necessary. Do not apply
brickwork the joints should be bud type paddle attached to an additional water to the surface
raked out and the surface bush electric drill (900rpm, 1000w). during finishing as this may cause
hammered to form a key. The Mix vigorously for at least 2 surface cracking. Once setting
surface to which the GROUT minutes after adding all the has started DO NOT attempt to
105 is applied should be clean, mixture to the water. GROUT 105 remix or to smooth the surface,
free from dust and thoroughly is designed to give a fluid mix but as this will cause the mechanical
dampened. Ensure that a 10mm this only develps after sufficient properties in particular strength
minimum thickness of material is mixing. The mix will appear dry at and adhesion to be lost.
obtained. first. Continue mixing until fluidity
develops.
For optimum results mix using
conventional mixing machines.
