Page 279 - MVI_1

13. TOOLS

Trend Router Technology TREND DOVETAIL CUTTER
TREND AUGER BIT

• These cutters are for Trend craft dovetail jigs
• D: 12.7 mm
• C: 20 mm
• Auger bit made from carbon steel • OL: 60 mm
• Single fluted bit-ideal for drilling deep holes in wood. • A: 104 degrees
• Must only be used on drills with torque controls fitted. • Shank diameter: 6.35mm(1/4in)
• Diameter: 19mm Code Description
• Shank diameter: 6.35mm(1/4in) 9501035 Trend Dovetail Angle 104° Degree
Code Description
9502210 Trend Auger Bit 19mm TREND POCKET HOLE PLUG CUTTER
TREND FLAT BIT

• Tool steel plug/pellet cutter
• An economical bit for cutting quick holes in timber • Use in a pillar drill to allow plugs to be made to cover the pocket hole
• With centre point, back tapered cutting edge and ground chip breakers pockets
• Shank diameter: 6.35mm(1/4in) • Allows plugs up to 52mm long to be created in end grain
• Diameter: 19mm • Shank diameter: 6.35mm(1/4in)
Code Description Code Description
9502200 Trend Flat Bit 19mm 9501660 Trend Pocket Hole Plug Cutter

2 28787