Page 280 - MVI_1

TREND TWO FLUTE CUTTER TREND SELF GUIDED CHAMFER CUTTER

• Self-guiding chamfer/bevel cutter
• Bearing follows the board beneath
• D: 32 mm
• C: 12.7 mm
• B: 9.5 mm
• A: 45 degrees
• Suitable for a wide range of applications such as engraving, grooving, • Shank diameter: 6.35mm(1/4in)
rebating and shallow mortising Code Description
• Use on softwoods, hardwoods, MDF, plywood and chipboard 9501040 Trend Self Guided Chamfer Angle 45mm
• All cutters have a bottom cut feature
• D: 35 mm
• OL: 60 mm TREND SELF GUIDED TRIMMER
• Shank diameter: 12.7cm(1/2in)
• Recommended speed: 1000-20000 RPM
• Available sizes: 6mm, 6.3mm, 8mm, 10mm, 12mm, 12.7mm 15mm
Code Description Trend Ref
9501000 Trend Two Flute Cutter 6mm C005X1/4TC
9501005 Trend Two Flute Cutter 6.3mm C008X1/4TC
9501010 Trend Two Flute Cutter 8mm C012AX1/4TC
9501015 Trend Two Flute Cutter 10mm C016X1/4TC
9501020 Trend Two Flute Cutter 12mm C019X1/4TC
9501025 Trend Two Flute Cutter 12.7mm C022X1/4TC
9501030 Trend Two Flute Cutter 15mm C024AX1/4TC
9501060 Trend Two Flute Cutter 12.7mm C153DX1/2TC
9501065 Trend Two Flute Cutter 12.7mm C153X1/2TC
9501075 Trend Two Flute Cutter 12.7mm C164X1/2TC • Used for trimming plastic or plywood overlays
• Also for copy profiling with a template
• D: 9.5 mm
TREND ROUND OVER OVOLO CUTTER • C: 12.7 mm
• B: 9.5 mm
• A: 90 degrees
• Shank diameter: 6.35mm(1/4in)
Code Description
9501050 Trend Self Guided Trimmer 12.7mm
TREND TEMPLATE PROFILE

• Self-guiding cutters for rounding over edges
• They are supplied with two bearings
• Use the larger bearing when creating round over cuts • Shank mounted bearing profilers are ideal for template guidance
• If the cutter is lowered, a top quirk can be produced • Use for rebating and trimming edges only
• Bullnose mouldings can also be produced by taking a second pass from • Extra care must be taken to avoid cutter breakage
the opposite side of the workpiece • D: 12.7mm
• Does not require a side fence • C: 25.4mm
• Shank diameter: 6.35mm(1/4in) • Shank diameter: 6.35mm(1/4in)
Code Description Code Description
9501045 Trend Rounding Over 6.3mm 9501055 Trend Template Profile 12.7mm

2888
28