Page 1100 - Flipbook_SolidDesignSoutheast2020

Design features

Materials of Construction High Care Design Features
The system is designed to satisfy current food regulations The construction of the Sparc MLW allows for easy disassembly
and only utilises product contact materials approved for for cleaning and inspection without tools in less than fifteen
food contact use. minutes.
• The MLW is designed and fabricated in such a way that all
All direct food contact materials and indirect external
surfaces are free of sharp corners and crevices. All welded
surfaces are:
joints are smooth, continuous butt type joints. They are
• Smooth
durable and meet all sanitary design criteria.
• Impervious
• Free of cracks and crevices • All stainless steel components and fabrications are
• Non-porous mechanically surfaced to #4 grade finish (20-25 Ra).
• Non-absorbent This minimizes the potential growth of microbial contaminants
• Non-contaminating and makes it easier to visually confirm cleanliness.
• Non-reactive
• All internal and external angles are coved or rounded with
• Corrosion resistant
defined minimum radii to prevent contamination and allow
• Durable and maintenance free
for easy wipe down and water run off.
• Non-toxic
• Cleanable • All mating surfaces are continuous (e.g. substantially flush).
• No visible or exposed wiring or cabling, other than the mains
'No Tool' Changeover Features
power cable, that would need to be cleaned unplugged or
Capable of being reconfigured to suit different product sizes
otherwise be visible to operators.
quickly and easily without the use of tools. Simply select the
appropriate recipe via the touch screen press [RUN]. • No exposed fasteners, reducing growth niches.
• Each conveyor assembly simply lifts off and can be removed • No exposed threads, again, making the machine easier
from its location frame. to wipe and ensure cleanliness.
• The outlet end of each conveyor assembly employ a unique • All conveyor belts are blue in colour and suitable for soaking
pivot end arrangement for quick access in order to facilitate in typical high care degreasing agents, detergents and hot
removal of the product contact belts. water.
• All conveyor assemblies are blue in colour and able to be
• The design provides for no tool access to the underside of
the conveyor and drive areas for cleaning and inspection. pressure-washed using typical high care degreasing agents,
detergents and hot water.
• The conveyor belts are self-tracking and therefore require
no tracking mechanism making for quick and effortless • The system is designed to satisfy the current food regulations
reassembly. and utilize product contact materials that are approved for
food contact use.
• As an option, the Sparc MLW may be supplied with a
Contact Part Cleaning Cart. The cleaning cart is designed • Fully sealed technical area eliminates potential contamination.
to accept each disassembled component and allow each • No compressed air service required eliminating the potential
to be sprayed with detergent. After a period, the detergent of contamination caused by leakage of compressed or other
can be rinsed with water and the components left to dry contaminants into the product zone.
before reassembly.
• All conveyor bearings are stainless steel, "sealed-for-life" type
and purposely oversized for added robustness, extended life
and reliability.

Destined from day one
to exceed global standards
for food safety...