Page 1977 - Flipbook_SolidDesignSoutheast2020

Y-1144 Vibro2011SPR_T-1129 Vibroscreen Brochure 3/7/11 4:52 PM Page 3

Sift, Scalp, De-dust, Dewater or Classify Virtually Any Bulk Solid or Slurry Free L

The Kason
controls an
Adjustable Flow Patterns processing
equipmen
Flow patterns of material can be fine tuned for according
screening efficiency by repositioning the bottom materials a
eccentric weight relative to the top eccentric parameter
weight.
the effect
in flow rat
temperatu
variety of s
offered. La
customer-
held in str
can be doc
for custom
the test.
0° (In Phase) 30° Out of Phase VIBROSCR
Principle of Operation From a central Material spirals screeners
feed, material slightly from the single and
The main screening assembly of a Kason screener is suspended on rugged flows to screen center to periphery, measuring
springs that allow it to vibrate freely while minimizing power consumption
periphery in a increasing retention classifying
and preventing vibration transmission to the floor. The assembly is straight line. time. Recommended dewaterin
equipped with one imbalanced-weight gyratory motor that creates
for general purpose both gravi
multi-plane inertial vibration for the purpose of controlling the flow screening. pressurize
path of material on screen surfaces, and maximizing the rate at which
material passes through the screen. All models
screeners a
Material is fed onto the center of the screen, causing particles larger than designs, al
screen apertures to travel across the screen surface in controlled pathways, interior co
and exit through a discharge spout located at the screen’s periphery, while inspection
particles smaller than screen apertures pass through the screen onto a changes a
lower screen or exit through a lower discharge spout.

Single-deck screeners are generally utilized for “scalping” or “sifting”
(removing a small percentage of oversize material through the upper 45° Out of Phase 90° Out of Phase
discharge spout), for “de-dusting” (removing a small percentage of Material flows from Prevents oversize Genu
undersize material through the lower discharge spout), or for “dewatering” center in a distinct material from
(removing liquid through the lower discharge spout). spiral pattern, further discharging.
increasing retention Maximiz
Multi-deck screeners (two-deck shown) are generally utilized for time. Recommended perform
”classifying” of particles in three to five predetermined sizes, or when for classification of circular
equipped with integral KASCADE™ screening decks (see page 7), for particles and screening
increasing the capacity of a screener without increasing its diameter. of wet material.
Kason rep
or exceed
aftermarke
other OEM
life and up
cost.
Exact-fit sc
or model o
screener in
screens an
mount san
Single-Deck Multi-Deck High-Capacity High-Capacity Pneumatic Ultra-Sanitary diameters
Screeners Classifiers Classifiers Sifters Sifters Screeners (460 to 254
from 2 in.
Satisfy general Sift, scalp and/or Scalp and Boost capacity Scalp in-line Meet cGMP, down to 5
screening classify de-dust at 60-160% with pneumatic 3-A, USDA All are ava
requirements into precise ultra-high within same conveying and FDA center hol
at low cost fractions rates footprint systems standards
(see page 3) (see page 6) (see page 6) (see page 7) (see page 7) (see page 8)

2