Page 3192 - Flipbook_SolidDesignSoutheast2020

BULLETIN P70607 CREATED 08/11

69 William Street Belleville, NJ 07109
Tel: 973-759-4600 Fax: 973-759-6449
E-mail: info@vac-u-max.com www.vac-u-max.com

PNEUMATIC POWDER FLOW PROMOTION SYSTEM

· Instantly clears bins, hoppers and other

mass flow devices of compacted solids.
Removes disruptive materials from
channels, ducts or recesses.
· Effectively breaks up arching, bridging,
clinging and other flow problems,
restoring free flow even with the most
difficult materials.
· Introduces sequential sonic air bursts
directly into aeration pads on the hopper

interior to instantly restore and maintain
material flow...without severe shock and
vibration methods that often damage
hoppers or further compact the powders.

Shown above mounted on the conical section · Available for 24V or 115V power supply.
of VAC-U-MAX 36” Filter Separator Unit. · Requires a 3/4” (19mm) compressed air
supply
Part # # of Valves Voltage
· Suitable for round or square hoppers.

P70607/4/N4/24V 4 24VDC

P70607/4/N4/115 4 115V

P70607/6/N4/24V 6 24VDC

P70607/6/N4/115 6 115V

INCLUDES: (1) Injector bottle with valves, aeration pads, NEMA 4 enclosure with
adjustable controls, 40ft (12m) of 3/4” (19mm) ID high pressure air hose* and
mounting plate for vertical bottle orientation.

* When supplied for field mounting on existing systems, the injector bottle must be
located within 10 ft (3m) of the aeration pads.

Is wholly owned subsiadiary of