Page 929 - Flipbook_SolidDesignSoutheast2020

EI

EASTERN INSTRUMENTS

NEMA-4 PAINTED/STAINLESS PACKAGE

Electronics Dimensions

12” x 16” x 9”

Additional Options

Remote Communication Protocol Filtering

A variety of optional remote communications protocols Filtering of the rate signal allows for the smoothing of the
are available, including communication via Ethernet/IP, instantaneous flow rate output delivered by the CentriFlow®
DeviceNet or ProfiBus. The standard data transmitted Meter. Filtering of the rate signal can be accomplished
includes flow and total, the meter’s status, zero read back, both locally on the HMI, or by using the remote signal that
the internal temperature, an alarm target, calibration is sent via any remote communication protocol. Filtering
values and the ability to remotely reset zero. Additional can be accomplished at intervals ranging from .1 seconds
information is also available upon request. up to 10 seconds.

Multiple Calibration Weighted Count

If multiple products are to be run through the CentriFlow® The Weighted Count Option allows for the generation of
Meter, multiple calibration voltages can be stored and a much slower pulse output of your total for applications
selected as each product is run through the meter. Up to that would otherwise need a High Speed Counter Card
8 values can be stored locally, however, an infinite number to read the 500 Hz Frequency standard flow rate signal.
of calibration values can be sent to the electronics via one (Example: 1 pulse/100 lb).
of the remote communications protocols.

19
Type I Solids Flow Meters