Page 23 - AirFlo's Installation Guide R80207

A Division of Stein Industries, Inc. 7135 Northland Drive North Brooklyn Center, MN 55428-1514 Phone (763) 504-3570
DATE: 3/17/2009 1OF4 REV:
FIGURE 1.1
PIN
FIGURE 1.3 VERTICAL RACK
BASE RACK HOLES
FIGURE 2.1
INSTALL GUIDE FOR SWINGARM VERTICAL RACKS
SAWTOOTH BASE RACK
PIN PIN
STEP 1
INSTALL THE SAWTOOTH BASE RACK. POSITIONTHERACKBY FIRST RESTING THE REAR RACK PINS ON THE MOUNTING BAR OR IN THE HOLES IN THE BACK OF YOUR CASE. THENSLIDINGTHERACK TOGETHER AND PLACING THE FRONT PINS INTO THE MOUNTING HOLES ON THE FRONT OF THE CASE SEE FIGURES 1.1, 1.2, & 1.3
PLEASE NOTE THAT THE CASE SHOWN HAS A REAR MOUNTING BAR. YOUR CASE MAY NOT HAVE ONE. IFYOURCASEDOESNOT HAVEAMOUNTINGBAR, USETHE HOLES IN THE BACK OF THE CASE TO REST THE PINS IN.
STEP 2
PLACE THE VERTICAL RACK IN PLACE. THEPINSINTHEBOTTOM OF THE RACK ARE INSERTED INTO SLOTSONTHEBASERACK. ADJUST TO DESIRED LOCATION BY PLACING THE PINS IN THE END OF THE VERTICAL RACK INTO DIFFRENT HOLES ON THE BASE RACK.
SEE FIGURES 2.1 & 2.2
FIGURE 1.2 CASE WITH MOUNTING BAR
FIGURE 2.2
TITLE: INSTALL GUIDE, SWINGARM VERTICAL RACKS
DMF: ---PC1038 FILE: R20109-2.idw
PROPRIETARYDRAWINGOFCARLSONAIRFLOMERCHANDISINGSYSTEMS CREATEDBY:creed CONFIDENTIALITY NOTICE: This document is confidential and privileged and is intended for the sole use of the addressee. If you DRAWING/PART NUMBER:
REV. DATE:
6/2/2013 SHEET
receive this document in error, you are advised that any disclosure, copying, distribution or the taking of any action in duplicating this document is strictly prohibited and could result in legal action. This product may be covered under one, or more patents.
R20109-2
A
PIN