Page 25 - AirFlo's Installation Guide R80207

A Division of Stein Industries, Inc. 7135 Northland Drive North Brooklyn Center, MN 55428-1514 Phone (763) 504-3570
TITLE: INSTALL GUIDE, SWINGARM VERTICAL RACKS DMF: ---PC1038 FILE: R20109-2.idw
PROPRIETARYDRAWINGOFCARLSONAIRFLOMERCHANDISINGSYSTEMS CREATEDBY:creed CONFIDENTIALITY NOTICE: This document is confidential and privileged and is intended for the sole use of the addressee. If you DRAWING/PART NUMBER:
REV. DATE: 6/2/2013 SHEET
DATE: 3/17/2009 3OF4 REV:
FIGURE 5.1 SAWTOOTH BASE RACK
PIN PINHOLES
FIGURE 5.2
STEP 6
RANGEIS6.5 AT 0.5 SPACING
FIGURE 6.1
WITH THE SLIDE ON THE SWINGARM VERTICAL IN A SET POSITION PLACE THE RACK BACK ON THE SAWTOOTH BASE RACK.
SEE FIGURE 6.1
NOTES
IF YOU HAVE ANY QUESTIONS PLEASE CALL YOUR SALES REPRESENTATIVE OR CUSTOMER SERVICE AT 1-800-999-9399
receive this document in error, you are advised that any disclosure, copying, distribution or the taking of any action in duplicating this document is strictly prohibited and could result in legal action. This product may be covered under one, or more patents.
R20109-2
A
SLIDE RACK
STEP 5
WITH THE SWINGARM VERTICAL RACK OUT OF THE CABINET SET SLIDERACKINPOSITION. USETHE MEASUREMENT DONE ON STEP 4 TO SET THE HEIGHT USING THE PIN AND MOUNTING HOLES ON THE SIDE OF THE RACK.
SEE FIGURES 5.1 & 5.2
SLIDE RANGE