Page 24 - AirFlo's Installation Guide R80207

RACK LEG
SAWTOOTH RACK
LEGON VERTICAL RACK
STEP 3
SWING THE LEGS ON THE BACK OF THE VERTICAL RACK OUT AND PLACE THEM IN THE SAWTOOTH RACK. ADJUSTTHERACKTO DESIRED ANGLE AND POSITION BY MOVING THE RACK LEG INTO DIFFRENT POSITIONS ON THE SAWTOOTH RACK.
SEE FIGURES 3.1 & 3.2
SAWTOOTH RACK
A Division of Stein Industries, Inc. 7135 Northland Drive North Brooklyn Center, MN 55428-1514 Phone (763) 504-3570
DATE: 3/17/2009 2OF4 REV:
FIGURE 4.1
FIGURE 3.1
FIGURE 4.2
TITLE: INSTALL GUIDE, SWINGARM VERTICAL RACKS
DMF: ---PC1038 FILE: R20109-2.idw
PROPRIETARYDRAWINGOFCARLSONAIRFLOMERCHANDISINGSYSTEMS CREATEDBY:creed CONFIDENTIALITY NOTICE: This document is confidential and privileged and is intended for the sole use of the addressee. If you DRAWING/PART NUMBER:
REV. DATE:
6/2/2013 SHEET
receive this document in error, you are advised that any disclosure, copying, distribution or the taking of any action in duplicating this document is strictly prohibited and could result in legal action. This product may be covered under one, or more patents.
R20109-2
A
FIGURE 3.2
STEP 4
MEASURE
WITH THE UPPER SLIDE RACK FULLY RETRACTED INTO THE VERTICAL RACK MEASURE THE DISTANCE FROM THE TOP TO THE REAR OF THE CASE
SEE FIGURES 4.1 & 4.2