Page 186 - Pontiac Catalog

Pontiac Engine - Intake

Pontiac Engine
INL11351

INL10116
Intake Plug - Manual Trans
64-79 Pontiac Intake Bolts
68-72 Pontiac Valley Pan Pn# - INL10116 -10pc $18.00 Set Pn# - INL10429 -1pc $8.00 Ea
Pn# - INL13393 - 1pc $149.00 Ea 64-69 Pontiac, GTO, Firebird- Intake Manifold Bolts - Black zinc. 68-72 All Pontiac Intake Pipe Plug with Square Indent for Engines
with 4 Speed Transmission. The originals were usually black zinc
Factory correct for cast Iron manifold applications. this is black phosphate.
1968-72 Pontiac (All Models V8) Factory Correct Engine Intake
Stamped Steel Valley Pan. Silver Zinc Plating but has "Tomahawk"
Lightly stamped in front. Can Be filled. Pn# - INL11351-19pc $24.00 Set
1970-79 Pontiac, GTO, Firebird Intake Manifold Stud / Bolt Kit.
Used starting in 70 to hold the front AC brackets, alternator
bracket and the throttle bracket to the intake and intake to the head.
INL11353
Spade Temp Sending Unit
68-79 Valley Pan Gasket Pn# - INL13700 - 1pc $35.00 ea
1967-81 Temperature sending unit cars With guages
Pn# - INL11661 -1pc $8.00 Ea INL11352 Factory Exact with stand up spade wire connector.
1968-79 Pontiac, GTO, Firebird V8 Cork Valley Pan Gasket
69-72 RA 4 / HO Intake Bolts
Pn# - INL11352-14pc $24.00 Set
1969 GTO, Firebird Ram Air IV Intake Manifold Stud / Bolt Kit.
Ram Air cars with the aluminum intake and the cast iron cross
over used large washer and flat head bolt to bolt the crossover in.
INL10402
INL10403
Pn# - INL11353-23pc $32.00 Set
1970-72 GTO, Firebird Ram Air IV Intake Manifold Stud / Bolt Kit. Engine Temp Sending Units
Ram Air cars with the aluminum intake and the cast iron cross
Pontiac Valley Pan Bolts over used large washer and flat head bolt to bolt the crossover in. Pn# - INL10402 - 1pc $22.00 ea
Pn# - INL10128 -4pc $8.00 Set 68-81 Temperature Sending Unit for Cars with Gauges.
Appearance very close to original except side post led
67-79 Pontiac Factory Correct Valley Pan Bolts & Washers.
These bolts hold the engine valley pan to the engine block.
Pn# - INL10403 - 1pc $16.00 ea
68-81 Temperature Sending Unit for Cars with NO Gauges.
Appearance exact to NOS original.

69-70 Ram Air IV Intake Bolts
INL11672
Intake Manifold Gaskets Pn# - INL10266 -8pc $18.00 Set
69-70 Ram Air IV, GTO, Judge, Firebird, Intake Manifold Heat
Pn# - INL11672 - 3pc $24.00 Set Crossover Bolts. These are the correct bolts that hold the cast
iron heat crossover to the cylinder heads.
1965-71 Pontiac, GTO, Firebird, Intake Manifold Gaskets All V8. Pontiac Intake Vacuum Valve
For all V8 Engines except Ram Air 4 & 71 455 HO.
INL11350 Pn# - INL13106 - 1pc $69.00 Ea
Pn# - INL11673 - 3pc $24.00 Set 1967-74 Pontiac (all Models) Intake Manifold Vacuum Control
1969-71 Pontiac, GTO, Firebird, Intake Manifold Gaskets. Valve. This is made off the 69 valve and has all the correct letters
For all V8 Ram Air 4 & 71 455 HO Engines. in the plastic and at the vac hose nipples. This is factory exact.
Matches GM # 1115365 & GM#1115364.
Pn# - INL11668 - 3pc $24.00 Set
1972-79 Pontiac, GTO, Firebird, Intake Manifold Gaskets All V8. INL11349

70-79 Intake Stud
Pn# - INL11349 - 3pc $4.00 Ea
1970-79 Pontiac, GTO, Firebird Intake Manifold Stud / Bolt Kit.
Used starting in 70 to hold the front AC Brackets, Alternator
bracket and the throttle bracket to the intake and intake to the head. Pontiac Intake / Carb Fitting
Pontiac Engine Grommets Pn# - INL11350 - 12pc $15.00 Set Pn# - INL15215- 1pc $8.00 Ea
Pn# - INL10309 $4.00 ea 1970-79 Pontiac, GTO, Firebird Intake Manifold Stud / Bolt Kit. 1964-67 Pontiac (all Models) Intake Manifold & Carb Brass
Fitting For 3/8" PCV Vacuum Hose. Used as intake and carb
Used starting in 70 to hold the front AC Brackets, Alternator
1968-81 Pontiac Engine Valley Pan PCV Valve Grommet 1pc bracket and the throttle bracket to the intake and intake to the head. vacuum source fitting, 1/8" Pipe, Brass, 3/8 Hose Nipple.

www.Inlinetube.com