Page 130 - sony camera manule-Book

Precautions and maintenance (Continued)

• Do not damage the power cord (mains lead) x How to prevent moisture condensation
such as by placing anything heavy on it. When you bring your camcorder from a
• Keep metal contacts clean. cold place into a warm place, put your
• Keep the Remote Commander and button-type camcorder in a plastic bag and seal it
battery out of children’s reach. If the battery is tightly. Remove the bag when the air
accidentally swallowed, consult a doctor temperature inside the plastic bag has
immediately. reached the surrounding temperature (after
• If the battery electrolytic liquid has leaked:
about 1 hour).
– consult your local authorized Sony service
facility. LCD screen
– wash off any liquid that may have contacted
your skin. • Do not exert excessive pressure on the LCD
screen, as it may cause damage.
– if any liquid gets in your eyes, wash with
plenty of water and consult a doctor. • If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
x When not using your camcorder for a This is not a malfunction.
long time • While using your camcorder, the back of the
• Periodically turn it on and let it run such as by LCD screen may heat up. This is not a
playing back or recording images for about 3 malfunction.
minutes.
• Remove a disc from your camcorder. x To clean the LCD screen
If fingerprints or dust make the LCD screen
• Use up the battery pack completely before dirty, it is recommended you use a soft
storing it.
cloth to clean it. When you use the LCD
Moisture condensation Cleaning Kit (optional), do not apply the
cleaning liquid directly to the LCD screen.
If your camcorder is brought directly from a Use cleaning paper moistened with the
cold place to a warm place, moisture may liquid.
condense inside your camcorder, on the
surface of the disc, or on the pickup lens. x On adjustment of the touch panel
This may cause a malfunction to your (CALIBRATION)
camcorder. The buttons on the touch panel may not
work correctly. If this happens, follow the
x If moisture condensation has occurred procedure below. It is recommended that
Leave your camcorder for about 1 hour you connect your camcorder to the wall
without turning it on. outlet (wall socket) using the supplied AC
Adaptor during the operation.
x Note on moisture condensation
Moisture may condense when you bring 1 Turn on your camcorder.
your camcorder from a cold place into a 2 Touch (HOME) t (SETTINGS)
warm place (or vice versa) or when you use t [GENERAL SET] t
your camcorder in a humid place as [CALIBRATION].
follows:
• You bring your camcorder from a ski slope into
a place warmed up by a heating device.
• You bring your camcorder from an air
conditioned car or room into a hot place outside.
• You use your camcorder after a squall or a
shower.
• You use your camcorder in a hot and humid
place.
130