Page 131 - sony camera manule-Book
P. 131

3 Touch “×” displayed on the screen with the   Pickup lens
         corner of the “Memory Stick PRO Duo” or
         the like 3 times. The position of “×”
         changes.
         Touch [CANCEL] to cancel.
       If you did not press the right spot, try the
       calibration again.
       b Notes
       • Do not use a sharp-pointed object for
        calibration. Doing so may damage the LCD
        screen.
                                       About care and storage of the lens
       • You cannot calibrate the LCD screen if it is
        rotated, or closed with the screen facing out.  • Wipe the surface of the lens clean with a soft
                                        cloth in the following instances:
       On maintenance of the casing     – When there are fingerprints on the lens
                                         surface.
       • If the casing is soiled, clean the camcorder body
        with a soft cloth lightly moistened with water,   – In hot or humid locations
        and then wipe the casing with a dry soft cloth.  – When the lens is exposed to salty air such as
       • Avoid the following to avoid damage to the   at the seaside.
        finish:                        • Store in a well-ventilated location subject to
        – Using chemicals such as thinner, benzine,   little dirt or dust.
         alcohol, chemical cloths, repellent, insecticide   • To prevent mold, periodically clean the lens as
         and sunscreen.                 described above. It is recommended that you
        – Handling the camcorder with above   operate your camcorder about once a month to
         substances on your hands.      keep it in optimum state for a long time.
        – Leaving the casing in contact with rubber or
         vinyl objects for a long period of time.  About care of the viewfinder
                                       To remove dust from inside the viewfinder,
       On the pickup lens              follow the procedure below.
       • Do not touch the pickup lens inside the   1 Pull out the viewfinder.
        disc cover. Keep the disc cover closed
        except when inserting and removing the   2 While pushing in the tab on the bottom
        disc, to keep dust out.          of the viewfinder with a fine-tipped
                                         implement such as a ball point pen, pull   Additional Information
       • When your camcorder does not work
                                         the eyecup block in the direction of the
        because the pickup lens is dirty, clean it
                                         arrow to remove.
        with a blower (optional). Do not touch the
        pickup lens directly during cleaning
                                                            Tab
        because this may cause the camcorder to
        malfunction.






                                                          Continued ,  131
   126   127   128   129   130   131   132   133   134   135   136