Page 139 - sony camera manule-Book

A Built-in microphone (38) • When you are recording movies with an
An Active Interface Shoe compatible external flash (optional) connected to the
microphone (optional) will take accessory shoe, turn off the power of the
external flash to prevent charging noise
precedence when connected.
being recorded.
B Lens (Carl Zeiss Lens) • You cannot use an external flash (optional)
and the built-in flash at the same time.
C Flash (86)
• When an external microphone (optional) is
D Infrared port/Remote sensor connected, it takes precedence over the
Point the Remote Commander (p. 140) internal microphone (p. 38).
towards the remote sensor to operate • Slide the shoe cover after pulling out the
your camcorder. viewfinder.
E Camera recording lamp (94) H Viewfinder lens adjustment lever (25)
Lights up in red during recording. I (VIEW IMAGES) button (32, 42)
Flashes when remaining media space or
battery power is low. J EASY button (32)
F HDMI OUT jack (48) K . (back light) button (40)
G Active Interface Shoe L Tripod receptacle
The Active Interface Shoe supplies Attach the tripod (optional: the length of
power to optional accessories such as a the screw must be less than 5.5 mm
video light, a flash, or a microphone. (7/32 in.)) to the tripod receptacle using Quick Reference
The accessory can be turned on or off as a tripod screw.
you operate the POWER switch on your
camcorder. Refer to the operating
instructions supplied with your
accessory for details.
The Active Interface Shoe has a safety
device for fixing the installed accessory
securely. To connect an accessory, press
down and push it to the end, and then
tighten the screw. To remove an
accessory, loosen the screw, and then
press down and pull out the accessory.
Continued , 139