Page 140 - sony camera manule-Book

Identifying parts and controls (Continued)

Remote Commander b Notes
• Remove the insulation sheet before using the
Remote Commander.
Insulation sheet

• Point the Remote Commander towards the remote
sensor to operate your camcorder (p. 139).
• When no commands have been sent from the
Remote Commander in a certain period, the
orange frame disappears. When you press any of
b / B / v / V, or ENTER again, the frame appears
at the position where it was displayed last.
• You cannot select some buttons on the LCD
screen using b / B / v / V.
To change the battery of the Remote
A DATA CODE button (90) Commander
Displays the date and time or camera setting
data of the recorded images when you press this 1 While pressing on the tab, inset your
during playback. fingernail into the slit to pull out the battery
case.
B PHOTO button (37)
2 Place a new battery with the + side facing
The on-screen image when you press this up.
button will be recorded as a still image.
3 Insert the battery case back into the Remote
C SCAN/SLOW buttons (43, 44) Commander until it clicks.
D . > (Previous/Next) buttons (34,
43, 44)
E PLAY button (34, 43)
Tab
F STOP button (34, 43)
G DISPLAY button (25)
WARNING
H Transmitter
Battery may explode if mistreated. Do not
I START/STOP button (37)
recharge, disassemble or dispose of in
J Power zoom buttons (38, 46) fire.
K PAUSE buttons (43)
• When the lithium battery becomes weak, the
L VISUAL INDEX button (42) operating distance of the Remote Commander
Displays a VISUAL INDEX screen when you may shorten, or the Remote Commander may
press this during playback. not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery.
M b / B / v / V / ENTER buttons
Use of another battery may present a risk of fire
When you press any button on the VISUAL or explosion.
INDEX/Film Roll Index/Face Index screen or
Playlist, the orange frame appears on the LCD
screen. Select a desired button or an item with
b / B / v / V, then press ENTER to enter.
140