Page 20 - sony camera manule-Book

Step 2: Charging the battery pack

POWER switch

DC IN jack
Battery pack

CHG (charge) lamp
To the wall outlet
Jack cover AC Adaptor (wall socket)
DC plug Power cord (Mains lead)
You can charge the “InfoLITHIUM” Open the jack cover, and connect the
battery pack (H series) (p. 128) after DC plug of the AC Adaptor.
attaching it to your camcorder. Make sure that the v mark on the DC
plug is facing to the v mark on your
b Notes camcorder.
• You cannot attach any “InfoLITHIUM” battery
pack other than the H series to your camcorder.
4 Connect the power cord (mains
lead) to the AC Adaptor and the
1 Slide the POWER switch in the wall outlet (wall socket).
direction of the arrow to OFF The CHG (charge) lamp lights up and
(CHG) (The default setting). charging starts. The CHG (charge) lamp
turns off when the battery is fully
charged.
2 Align the terminals of the battery
pack and your camcorder (1),
then attach the battery pack in the 5 After charging the battery pack,
direction of the arrow until it disconnect the AC Adaptor from
clicks (2). the DC IN jack on your
camcorder.

3 Connect the AC Adaptor to the
DC IN jack of your camcorder.
20