Page 21 - sony camera manule-Book

b Notes
• Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
To remove the battery pack
1 Slide the POWER switch to OFF
(CHG).
After a while, the approximate recordable
2 Press and hold the BATT (battery time and battery information appear for
release) button and remove the battery about 7 seconds. You can view the battery
pack in the direction of the arrow.
information for up to 20 seconds by Getting Started
BATT (battery release) button pressing DISP/BATT INFO again while the
information is displayed.
Remaining battery (approx.)

Recording capacity (approx.)
Charging time
b Notes
Approximate time (min.) required when
• When you remove the battery pack or
disconnect the AC Adaptor, make sure that the you fully charge a fully discharged battery
(Movie) lamp/ (Still) lamp (p. 23)/ pack.
ACCESS lamp (p. 28)/access lamp (p. 30) is
Battery pack Charging time
turned off.
• When storing the battery pack, fully discharge NP-FH50 135
the battery pack before storing it for an extended NP-FH60 (supplied) 135
period (see page 129 for the details of storage).
NP-FH70 170
To use a power source from a wall NP-FH100 390
outlet (wall socket)
Make the same connections as you do when Available recording time
charging the battery pack. The battery pack
Approximate time (min.) available when
will not lose its charge in this case.
you use a fully charged battery pack.
“HD” stands for high definition image quality,
To check the remaining battery
and “SD” stands for standard image quality.
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.

Continued , 21