Page 486 - IE.IE Limited - Sealey Tools Catalogue

486
Exhaust Fume Extractors
B Exhaust Fume Extractor with 3mtr Ducting AB Model No. EFS07
Features soft rubber cylindrical cone to suit most exhausts. Adjustable height for 230V use on small cars or commercial vehicles. Air inlet valve creates vortex within extractor to ensure all fumes are dispersed (requires air supply). 1.2mtr Body length with additional 3mtr flexible ducting. Mounted vertically on trolley with integral duct
compartment for easy manoeuvrability and compact storage.
Air Pressure:
Air Consumption: Minimum Height: Maximum Height: Duct Length: Overall Length:
90psi 16cfm 185mm 550mm 3mtr 4.2mtr
C
Exhaust Fume Extractor with 6mtr Ducting
Model No. EFS/93
Suitable for both large and small garages and workshops. Excellent as a back-up machine for garages with purpose-built fume extraction units. Suitable for cars and small commercials up to 10tonne GVW. Fitted with exhaust pipe cone that includes a port to allow use with gas analyser probes. Supplied with 6mtr flexible ducting.
A
Motor:
Airflow: Minimum Height: Maximum Height: Duct Length:
550W - 230V 560mtr3/hr 120mm 750mm 6mtr
C
Exhaust Adaptor for Twin Pipes
Model No. EFS07DE
Features soft rubber cylindrical exhaust pipe cones to suit most vehicles. Allows exhaust fume extractor to be used on twin exhaust vehicles. Suitable for use with Model No. EFS07 Exhaust Fume Extractor.
DE
Extractor Connector: Duct Length:
Ø65-90mm Male Taper 1.4mtr
230V
230V
D - E Exhaust Fume Extraction Systems Model No. SEE RIGHT
Wall mounting electric fan fitted with heat resistant ducting and exhaust pipe cone with exhaust gas analyser port. Ideal for bikes, cars and car derived vans. Requires installation onto workshop wall and ducting to expel exhaust gases. Does not include electrical switch gear. Ideal for smaller garages and workshops where space is limited. Available in single or twin hose configurations.
DE
F
750kg
Model No: Type: Motor: Duct Size:
EFS101
Single Duct 370W - 230V Ø75mm x 5mtr
EFS102
Twin Duct 370W - 230V Ø75mm x 5mtr
F
Exhaust Support Stand 750kg
Model No. ES750
Screw adjustment with easy-to-use spinner nut and ball bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over 670mm.
IMPORTANT INFORMATION
It is advised not to use an exhaust fume extractor when conducting a force regeneration on a vehicle fitted with a DPF (Diesel Particulate Filter) because of high temperatures from the exhaust. These high temperatures may melt the rubber exhaust cones or pipes on the fume extractor. Regeneration should be conducted outside in a well ventilated area away from buildings or other vehicles.
Capacity: Minimum Height: Maximum Height:
750kg 1390mm 2060mm
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk