Page 487 - IE.IE Limited - Sealey Tools Catalogue

A
B
A Exhaust Pipe Expander Set 3pc Model No. VS1668
Ideal for fitting aftermarket components to standard exhausts. Used to expand a length of pipe in equal proportions so the pipe is the same diameter and not tapered. Ensures a perfect fit with no leaks and also removes dents and clamp marks. Supplied in carry-case.
Capacity: Small; Ø30-44mm, Medium; Ø38-61mm, Large; Ø55-85mm Drive: Small; 16mm Hex, Medium; 17mm Hex, Large; 19mm Hex
Exhaust Tools
B Exhaust Pipe Cutter Ratcheting Model No. VS16371
Universal application pipe cutter designed for where access is restricted. Ratchet mechanism allows cutting without having to rotate the tool completely around the tubing. Suitable for the toughest materials including stainless steel exhaust pipes.
487
Maximum Thickness: Cutting Capacity: Replacement Cutting Wheel:
3mm Ø29-67mm VS16371B
Exhaust Pipe & Tubing Cutter
C
C Exhaust Pipe Cutter Pliers Model No. VS16372
Suitable for cutting exhaust pipes and steel or copper tubing up to Ø83mm. Plier design handles allow for even cutting pressure and enables access where space is restricted. 90° Handle movement produces a 360° cut.
D Exhaust Pipe Cutter Model No. AK6838
Suitable for cutting thin wall tubing up to 2.5mm thick. Designed to enable access where space is restricted. Ideal for cutting stainless steel exhaust pipes.
Length: 250mm
E
F Safety Goggles - Direct Vent Model No. SSP1
BS EN 166/F - Clear polycarbonate safety lens with direct ventilation in goggle frame.
I NEW
G Exhaust Pipe Cutter Model No. VS1637
D
E
Model No. VS1632
Designed for cutting thin walled steel and copper
tubing. Suitable for cutting exhaust pipe from Ø20 to 75mm.
Handle Length: Maximum Thickness: Cutting Capacity:
200mm 2.5mm Ø19-83mm
Maximum Thickness: Cutting Capacity: Replacement Chain:
2.5mm Ø75mm 398/CHN182
Handle Length: Maximum Thickness: Cutting Capacity:
210mm 2.5mm Ø20-75mm
H
F
G
Suitable for cutting thin wall tubing up to 3mm thick. Designed to cut where space is restricted, 120° handle movement produces a 360° cut. Ideal for cutting all exhaust pipes from Ø35 to 64mm.
Maximum Thickness: 3mm Cutting Capacity: Ø35-64mm
I Exhaust Assembly Paste 150ml Model No. SCS200
For ease of assembly and creates gastight exhaust joints. Suitable for use with Model No. AK4802 Caulking Gun.
Size: 150ml Cartridge
H Kevlar® Hot Sleeves Model No. SEE BELOW
Manufactured to CAT 2 BS EN 388 and BS EN 407 from 100% DuPont Kevlar®. Designed for use in engine bays to prevent cuts to forearms and burns from exhausts and other hot components. Thumb slot design ensures sleeve will stay in position.
Model No: Length: SSP36 355mm SSP37 460mm
For our full range of Safety Products, see pages 1012 to 1027