Page 488 - IE.IE Limited - Sealey Tools Catalogue

488
Exhaust Tools
A Catalytic Converter Back Pressure Test Kit
Model No. VSE953
Used to establish the working condition of the catalytic converter and silencer by measuring the relative back pressure of the system. Simply connect into the exhaust system using either of the two oxygen sensor dummy adaptors supplied in the kit. Gauge features a colour-coded scale for easy diagnosis and reads both pressure and vacuum so can be used on other areas of the vehicle allowing testing of low pressure fuel systems or engine vacuum. Supplied with gauge hanging chain to allow hands-free operation. Contents: Oxygen Sensor Adaptors; M12 x 1.25, M18 x 1.5mm, Small & Large Brass Cone Adaptors, Plastic Double End Cone, Plastic ‘T’ Piece, Gauge Hanging Chain
B Oxygen Sensor & Thread Chaser Set 5pc
Model No. SX0320
Suitable for oxygen sensors found on most modern vehicles. Cut-out and slots enable sockets to be fitted over wiring. Includes two chasers for cleaning and repairing damaged threads. Supplied in storage case. Sockets: Straight 80mm Deep 3/8"Sq Drive 22mm, Offset 31mm High 3/8"Sq Drive 22mm, Offset 50mm High 1/2"Sq Drive Octagon Drive 22mm
C Oxygen Sensor Thread Repair Kit Model No. VS5281
Time and money saving kit for replacing damaged oxygen sensor threads with a new threaded insert. Kit includes installation tool, reamer, two taps and five inserts in storage case.
A
B
C
Insert Thread Size: Tap Sizes: Replacement Inserts:
M18 x 1.5mm M18 x 1.5, M20 x 1.5mm (Pack of 5) VS5281R
Thread Chasers:
M12 x 1.25mm, M18 x 1.5mm
Gauge Scale: Pressure: Vacuum:
0-10psi 0-60cmHg
F
E
E Exhaust Doughnut Puller Model No. VS163
D
Steel construction with dipped vinyl handle. Enables fast removal and installation of rubber anti-vibration mountings found on modern exhaust systems.
F Exhaust Puller Tool Set 2pc Model No. VS1641
Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. 90° and 120° Hooks to suit block and ring mounts respectively.
Contents: 90° Angled Hook Puller 203mm, 120° Angled Hook Puller 220mm
I Spring Hose Clip Tool Model No. VS1669
Superb tool designed to help remove hoses fitted with constant pressure type hose clips, widely found on modern vehicles. In use, the tool is fast and effective. Use your fingers or 1/4"Sq drive to open the clips. Maximum Opening: 90mm
D Exhaust Spring Clamp Removal Tool VAG
Model No. VS1638
Robust steel tool for the safe removal and installation of the spring clamps used to attach exhaust system to manifold on VAG vehicles. Use with 17mm spanner.
G Exhaust Hanger Removal Pliers Model No. VS1631
I
Drive: Applications:
17mm Hex Audi, Seat, Skoda, VW
H Exhaust & Hose Clamp Pliers Model No. VS1666
Opens exhaust hose clamps quickly and easily. Ideal for Citroen, Peugeot and Renault exhaust clamps. Also suitable for prizing open many types of clamp or clip secured with nut and bolt. Comfort grip handles with self locking mechanism aid working on spring clamps. Length: 300mm
G
Enables fast, one-handed, removal of exhaust brackets from rubber hangers. Suitable for a wide range of cars and light commercial vehicles.
Length:
H
270mm
EXHAUST MOUNTING RUBBERS
For our range of Exhaust Mounting Rubbers, see page 496.
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk