Page 5 - FQ10493.Morgan-KirkmanInc.Greensboro.NC.DC15000G (Gravity Drain)

Page No. 4
Proposal No. Q10493
Date: May 3, 2017
Two (2) Water Make-Up Valves Including:

1. Average rate solenoid operated valve.
1.1 Anti-hammer diaphragm seat.

One (1) Outer Wall Temperature Sensor.

One (1) Water Recirculation Assembly Including:

1. Temperature actuated switch - electronic signaling type.
2. Recirculation water valve - solenoid operated.
2.1 Anti-hammer diaphragm seat.

One (1) Safety Monitor Including:

1. Temperature actuated switch - electrical signaling.
2. Safety shut-down features are included on the Ludell water heaters that
shut the heater down, if the stack temperature, water wall level, or wall
temperature exceed normal operating levels.
3. Automatic refire is a feature of the heater that is operational when all
heater safety requirements are satisfied. A safety shut-down will require
the heater to be restarted manually in accordance with the requirements of
U.L.

One (1) Set of Drawings Including:

1. Piping schematic.
2. Wiring schematic.

One (1) Operating and Maintenance Manual

Note I - Ludell Field Service

Ludell has included in its proposal the services of our field engineer for start-up. The
engineer will: inspect the equipment for proper installation, adjust controls to factory
standards, verify performance guarantees, and instruct your personnel on the
equipment features, maintenance and operational use. It is necessary to contact the
Ludell Service Department two (2) weeks prior to your planned equipment start-up.
Service is scheduled to begin and end during the normal work week (Monday – Friday).
Normal workday is 8 hours; any overtime will be billed separately. Weekend travel
and/or short term notice start-up service will be charged at additional cost. Additional
trips and service will be billed on a per diem basis, plus travel and living expenses at
cost.

Note II - Certified Inspection

All Ludell Direct Contact Water Heaters are factory inspected.