Page 2 - FQ10482.IveyMechanical.TN.15000S w5000 Gal Tank

Ivey Mechanical Proposal No. Q10482
131 Saundersville Road #200
Hendersonville, TN 37075 Date: April 12, 2017

Attention: Mr. Mac Brown Salesman: GET/kr

E-mail: mac.brown@iveymechanical.com Tel: 615-338-4044

Fax: 615-613-1564
Subject: Hot Water for Sanitation Clean-up
Florence, South Carolina

We are pleased to quote the following, Fully Packaged Model DC 15000S DIRECT CONTACT
WATER HEATER with Integral 5,000 Gallon Tank and dual delivery pump package to be
installed by the purchaser. This system is designed on the basis of the information supplied to
us by your plant to handle the following approximate quantities and temperatures and produce
the stated results.

CUSTOMER REQUIREMENTS:

Hot Water -------------------------------------------- 12,000 GPH (200 GPM @ 180 Deg. F.)

Cold Water (Minimum)-------------------------------------------------------------- 45 Deg. F.

Natural Gas Pressure (1,000 BTU/FT ) ----------------------- 5 PSIG @ 15,000 FT /HR.
3
3

HEATER CAPACITY:

Direct Contact Water Heater (Patent No. 4574775) is rated at 15,000,000 BTU/HR and is capable
of heating 200 GPM or (12,000 GPH) from 45 to 180 Deg. F. at sea level to 1,000 foot elevation.
Water can be heated up to a maximum of 180 Deg. F. at a reduced flow.

LUDELL EXTENDED WARRANTEE:

Ludell warrants its water heaters against defects in material and workmanship, under normal
use and service for a period of five (5) years after shipment for the fabricated stainless steel shell
and one (1) year for all other components. Ludell's obligation is limited to repair or replacement
f.o.b. Ludell's plant. Please note that customer supplied water chemistry may adversely affect
the equipment materials of construction. If the water supply is aggressive, acidic or high in
chlorides a higher-grade stainless steel alloy must be utilized. Contact Ludell for a quote
revision if your supply water chemistry is of poor quality.