Page 108 - Petron Plus with Price List

TYPICAL SPECIFICATIONS:
PETRON PLUS™ FORMULA 7
HEAVY DUTY SYNTHETIC GEAR LUBRICANTS for WIND TURBINES
—————————————————————————————————–—————————————
Part No. . . 54520 54522 54524 54526 54528 54530

ISO Grade . . 150 220 320 460 680 1000
VISCOSITY:
40°C, cSt, . . 150 220 320 460 680 1000
100°C., cSt, . . 21.1 28.5 38.5 50.7 69.0 98.8
Viscosity Index, . 166 169 172 174 181 184
Density 60°F, g/cc, . 0.86 0.87 0.87 0.87 0.87 0.87
Flash Point, COC, °F., . 425 425 435 445 435 430
Pour Point, °F., . -40 -40 -40 -38 -38 -36
Foaming Tendency, Sequence
I, II, III, . 0/0 0/0 0/0 0/0 0/0 0/0
Copper Corrosion, ASTM D-130
3 hrs. @ 100°C., . 1B 1B 1B 1B 1B 1B
Rust Prevention, ASTM D-665B., Pass Pass Pass Pass Pass Pass
ZFG Gear Scuffing Test, A/8.3/90
ISO 14635-1 (mod),
Failure Stage, . . 13 13+ 13+ 13+ 13+ 13+
FAG FE8 Bearing Wear Test
7.5/80-80 (DIN 51819-3),
Roller Wear (mg), 2 2 2 2 2 2
Water Separability, ASTM D
1401, Min. Time to 37 ml
Water 82°C, . . 20 20 20 20 20 25
TOST, ASTM D-943 mod.
hours, . . 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+
RPVOT, ASTM D-2722,
Minutes, . . 2500 2500 2500 2500 2500 2500
Color, . . . Orange Orange Orange Orange Orange Orange

Meets or Exceeds the Following Builder Approvals:

SIEMENS AG Flender gear
units, T 7300, Table A-c,
Flender Code No. . A36 A35 A34 A33 A32 A31

SEW Eurodrive:
SEW IG CLP HC . 150 220 320 460 680 1000
SEW SG CLP HC . 150 220 320 460 680 1000

MAG IAS, LLC, . P-77 P-39 / P-74 P-59 P-35 / P-39 P-34 P-78

Meets or Exceeds the Following Industrial Specifications:

Meets AGMA 9005-E02 . X X X X X X
Meets DIN 51517 Part 3 (CLP) X X X X X X
Meets ISO 12925-1 Type CKD X X X X X X

Other Applications:
Petron Plus 54520, and 54522 are suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gather-
ing, CO2 and other process gasses used in the natural gas industry.

Excellent product for remotely located gearboxes, where oil change-out is difficult.

Warranty: All products purchased from Petron Plus Global, Inc., (PPGI) are subject to terms and conditions set out in the contract, order acknowledgment and/or bill of lading. PPGI warrants only that
its product will meet those specifications designated as such herein or in other publications. All other information supplied by PPGI is considered accurate but is furnished upon the express condition
that the customer shall make its own assessment to determine the product’s suitability for a particular purpose. No warranty is expressed or implied regarding such other information, the data upon
which the same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose, or that the use of such other information or product
will not infringe any patent.