Page 95 - Willow Park Estates Closeout Manual

Boral Ply 40
®

SBS Modified Asphalt Fiberglass Reinforced Underlayment/Base Sheet
10 & 20 Year Material Warranty

Thank you for your purchase of Boral Ply 40 Underlayment 2. Improper ventilation. At minimum, ventilation must
®
manufactured by Malarkey Roofing Products (“Manufacturer”) comply with FHA Minimum Property Standards
for your tile roof. The “Manufacturer” warrants to you, the
original owner (not the contractor or builder), that the Boral 3. Improper storage or handling
®
Ply 40 Underlayment used on your roof will be free from 4. Traffic on or over the roof
manufacturing defects that cause leaks for the warranty
terms listed in Table 1. Boral Ply 40 Underlayment must 5. Defects in, or failure of flashing or metal work, or
®
®
be installed by a state-licensed roofing contractor where the primary roof covering under which Boral Ply 40
applicable (Approved Contractor), and installation must follow Underlayment is applied
all applicable building code requirements, and Boral Ply 40 6. Damage due to cracked or broken tiles, or as a result
®
Underlayment installation guide. of improper construction practices
For any portion of the Boral Ply 40 Underlayment that 7. Equipment installations, structural changes or other
®
®
does not perform as stated above, after inspection by the alterations to the roof after application of Boral Ply 40
“Manufacturer’s” authorized representative and a positive Underlayment, including painting or the application of
determination of material defect, The “Manufacturer” will pay cleaning solutions, coatings or other modifications
the cost of either repairing or replacing your Boral Ply 40 8. Settlement or distortion, failure or cracking of the roof
®
Underlayment as follows: If your Boral Ply 40 Underlayment decks, walls or foundation of the building
®
has been applied for less than 10 years, Malarkey will pay the
full reasonable cost to repair or replace any of the defective 9. Impacts of foreign objects
underlayment, including labor to re-install the Boral Ply 40 10. Violent or unusual weather conditions such as floods
®
Underlayment, including tear-off, disposal, and other related and other forces of nature
work. Malarkey reserves the right to arrange directly for
your Boral Ply 40 Underlayment to be repaired or replaced 11. Fire, acts of vandalism, and other, similar occurrences
®
instead of reimbursing you for such work. The remedy under 12. Replacement of the original roof covering or of the
this warranty is available only for that portion of your Boral
®
Ply 40 Underlayment actually exhibiting defects at the time of underlayment
settlement. The replacement Boral Ply 40 Underlayment, as 13. Any costs you incur which are not authorized in
®
well as any remaining original Boral Ply 40 Underlayment, will advance by the “Manufacturer.”
®
be warranted only for the remainder of the original warranty
period. This warranty may be registered online at www.BoralRoof.
com, but is not required. The terms of this warranty apply
For a Boral Ply 40 Underlayment installed more than 10 at the time of installation regardless of whether or not the
®
years, the replacement shall be prorated based upon the warranty is registered with Boral Roofing.
number of months the Boral Ply 40 Underlayment has been
®
installed on the roof. The owner must retain all documents and proofs of purchase
of Product for submission to the “Manufacturer” as validation
EXCLUSIONS of their claim.
This warranty covers only manufacturing defects in Boral
®
Ply 40 Underlayment which result in leaks. This warranty TABLE 1
covers the products named on the submission card below Slope Warranty Reduction
and sold and installed in the U.S. and Canada. It does not Product Requirement Terms per Month 1
cover other products such as roof covering, flashing and
metal work or damage to products attributable in whole Boral Ply 40 - 1 Layer 4:12 or higher 10 years N/A
or in part to other causes including, but not limited to:
Boral Ply 40 - 2 Layer 3:12 or higher 20 years 1/240
1. Improper installation or installation not in accordance
with the “Manufacturer’s” roofing specifications, 1 Reduction applicable after the first 10 years of installation.
application instructions, and approved practices