Page 273 - Villas at Savona Close-out Manual

INSULPRO PAINTS
11-19-15

8.0 EXECUTION

8.1 General

1. The Manufacturer shall provide the product applicable warranties refer to section
7.0. Application of the specified materials must be applied by Nationwide
Certified Applicator; all applicable warranties shall include labor and materials to
assure proper preparation and applications outlined in this section.

8.2 Products

1. Surface Conditioner/ Primer: Nationwide Chalk Force Acrylic high PH surface
Conditioner/ Chalk sealer. Ultra- Prime Elastomeric flexible adhesive
Waterproofing Primer.

2. Sealants: Waterproof Acrylic/Urethane Sealant applications is for surface cracks
greaterthan 1/16” but not to exceed ½”. Note: Structural cracking is not a
warrantable item. Refer to section 6.4 for approved sealants.

3. Horizontal Surfaces: Nationwide Ultra- Prime Elastomeric flexible adhesive
Waterproofing Primer.

4. Waterproof Coatings: Ultra Kote- Ceramic Insulating

5. Patching Materials: Thoro-Seal- applications is for surface cracks
greater than ½”. Custom Patch:applications is for hairline surface cracks

8.3 Pre Application Requirements

Considerations

1. All openings and joints including but not limited to metal frames, sliding
doors, Electrical, Mechanical and Plumbing penetrations, condensation piping and
decorative surface mounted components must be sealed with approved materials
referenced in section 6.0.

Page 7 of 15