Page 139 - MUD-catalog-2019_Neat

OP 139
Quick-Change Options
U Frames with Master Ejector Systems

Ordering Information for
U Frame with Master Ejector System
• Item number and description
(see table below right)
• “ S” diameter of locating ring supplied
standard 3.990
• Sprue bushing (if required) – “R” spherical
radius of sprue bushing furnished 1/2” or 3/4”
• “ O” small diameter of sprue orifice furnished
7/32”, 9/32” or 11/32”; 5/32” available on
request
• Optional locating rings and sprue bushings
• Knockout hole locations standard as shown
(others optional)
• Clamp slots as shown
• Mounting holes optional
• Additional ejection height available
(quotation on request)
• Optional interlocking ejector plate rails
available (quotation on request)
• Frames standard in prehard steel; prehard
stainless and other steel grades available
(quotation on request)

MUD U frames with master ejector systems are
S MUD Quick-Change Options for Mold Frames & Inserts | U Frames with Master Ejector Systems
R O designed to accept one Quick-Change insert
C
mold or a removable center section with two
smaller Quick-Change insert molds for complete
application flexibility. Each frame’s master ejector
system is equipped with pillar post pads to
support insert molds.

U Frame with
Self-Contained
.56 R
Master Ejector System
3.50 ITEM NO. C
3.00
10/12UF321MEP 2.500
10/14UF321MEP 2.500
10/16UF321MEP 2.500
12/14UF321MEP 2.750
Ø 1 1/8 12/16UF321MEP 2.750
12/18UF321MEP 2.750
13/16UF321MEP 2.750
L 13/18UF321MEP 2.750
14/16UF321MEP 2.750
14/18UF321MEP 2.750
W

U.S. 800-626-6653 ■ www.dme.net

Canada 800-387-6600 ■ Mexico 52-442-713-5666