Page 15 - MUD-catalog-2019_Neat

UF 15
Enhanced Series Mold Inserts

Solid & Laminated

SOLID

2.728 2.498 2.061 1.219 (4) 0.000 1.750 (4) 2.498 2.728 0.000 0.38 x 5° Lead
4.000
3.500 (2) 3.875 3.438 3.563
3.438
Return Pin & 3.125
Ejector
Plate SHCS
+.005
8.000 –.000
0.000 0.000

3.250
3.563 (2)
Return Pin & 4.000
Ejector
Plate SHCS 0.47 (2) n Provides room for thicker
4.996
5.456 pocket walls
1/4-20
MUD5000-62 0.230 0.246
n Reduces machine setup time
P3-1710-15 by providing more surface
0.40 1.877 ± .001
area for clamping
B3-1710 n Ejector plates are bolted together
1.877 ± .001
MUD5000-62 for maximum convenience
0.752
n Compatible with the MUD
0.375 +.001 PPAB-5 (2) 5/16-18 x 3
SHCS (2)
2.626 –.000 Quick-Change U Frame
AGP-826 (2)
0.360
0.360 n Installed with four leader pins
1/4-20 x 3/8 1.36 AGB-360 (2) and bushings, four return pins,
SHCS (4)
and eyebolt holes
n All-in-one post guides ejection,
LAMINATED retains the ejection system and MUD Quick-Change Mold Frames & Inserts for U-Style | Solid & Laminated – Enhanced Series
provides support without the use
2.728 2.498 2.061 1.219 (4) 0.000 1.750 (4) 2.076 2.498 2.728 2.076 0.000 2.061 (2) 0.38 x 5° of additional support pillars
4.000 Lead n Tapped hole for insert removal
3.500 (2) 3.438
Return Pin 3.438 3.125 n Finish-ground parting line plates
3.125
& SHCS
n Optional .480 thick ejector plates
+.005
8.000 –.000 n 08/09 Series mold inserts available
0.000 0.000
in DME #2 and #3 type steels
n Parting line plates bolt to the ear
plates (Laminated only)
3.250 3.125
3.563 (2) 3.563 3.563 (3)
Return Pin 4.000 n Other sizes available on request
& SHCS 4.996
5.456
n All enhanced inserts are quoted
upon request
1/4-20
MUD5000-62 0.230 0.246
P3-1710-15
0.40 1.877 ± .001
1.127
B3-1710 1.127
1.877 ± .001
MUD5000-62 +.001
0.750 -.000
+.001 5/16-18 x 3/4 5/16-18 x 3-1/2
2.626 –.000 PPAB-5 (2) SHCS (6) SHCS (2)
0.375 Ø 0.875
AGP-826 (2)
0.360
0.360
1.36 AGB-360 (2)
1/4-20 x 3/8
SHCS (4)
U.S. 800-626-6653 n www.dme.net

Canada 800-387-6600 n Mexico 52-442-713-5666