Page 94 - MUD-catalog-2019_Neat

AF 94

MUD Mold Base Adapter System

Prior to installation

Just as in the case of the companion ear plates, the installation of a MUD Quick-
Change adapter frame is a simple procedure. Once installed, a single adapter

frame will accommodate an unlimited number of standard mold bases.

MUD Quick-Change Adapter Frame Systems for Standard Mold Bases | Installation Instructions
Preparation
Before installing Master Unit Die Quick-Change adapter frame, thoroughly clean

and wipe down the molding machine platen. Inspect for rust build-up and high

spots. Be sure all platen surfaces are flat. Also, inspect the MUD adapter frame

plates for foreign matter and high spots (400 grit stone is recommended for

removing high spots).

After the platens and MUD adapter frame plates are cleaned and free of burrs,

spray the surfaces with a high quality mold protection. This aids in preventing

build-up between platens and the MUD adapter frame system.

ALWAYS check the ear plates for burrs
and nicks, stoning or filing as required.

Lubricate the slide areas of the ear
plate and adapter frame surfaces to

extend their life and to allow surfaces
to slide more freely.

U.S. 800-626-6653 n www.dme.net

Canada 800-387-6600 n Mexico 52-442-713-5666