Page 134 - Hot Runner & Control Systems 2020

131 Smart Series ®

Smart Series Mainframes (15 AMP)
®

WIDTH (W) Smart Series® Mainframe (15 AMP Max.)
Configurations
The 12 configurations illustrated below provide a wide selection of zone capacities
to suit most control applications. The 5-, 8- and 12-zone frames (MFP5, 8, and 12G)
Main AC power
input strain relief use individual frame sections. The 16 thru 48 zone frames use 2, 3, or 4 frame sections
Cooling Fan
rigidly fastened together into one prewired integral unit which requires only one main
AC power input connection. The Current Voltage monitor option will be factory installed
when ordered at same time as Mainframe. Control modules, cables, mold connectors
and other accessories are ordered separately (see table on next page).

 Each frame section
Thermocouple
input with (MFP5G, MFP8G,
retaining and MFP12G) has
latch
its own cooling fan.
Power output 9"
with retaining
latch  Multi-section frame
heights are multiples
of 9" height shown
12"
(e.g. MFP32G is
Smart Series ® | Smart Series ® Mainframes
WORLDWIDE WIRING 27" high).
CAPABILITIES
Unless otherwise specified, all  Main AC input
Smart Series Mainframes will be shown will always
supplied to accept 240 VAC, 3 phase, be in bottom frame
4-wire, 50-60 Hz input power. Wiring section. For higher
diagram (included on the access cover)
illustrates the variety of other voltage, power requirements,
phase and load balancing arrangements individual power
possible, such as: (380-415V, 3 phase, inputs and circuit
5-wire, 50-60 Hz), (208-240V, single breakers can be
phase, 3-wire, 50-60 Hz) and (110-120V,
single phase, 3-wire, 50-60 Hz). factory installed in
These wiring adjustments can be each section of a
performed in the field to suit the stack frame on a
requirements of the application.
If specified at the time of original special order basis.
order, DME will supply the
Mainframe required.
MOLD POWER CABLE (10, 20 OR 30 FOOT)
ITEM NUMBER W*
THERMOCOUPLE CABLE (10, 20 OR 30 FOOT)
MFP5G 14 / 16
3
MFP8G 20 / 16
3
MFP12G 28 / 16
3
* Dimension does not include
connectors
NOTE: Combination frames to
accommodate both 15 and
30 AMP modules (with or
without communications)
are available by special order.

U.S. 800-626-6653  Canada 800-387-6600  dme@milacron.com  www.dme.net