Page 151 - Mold Bases & Plates 2020

S
S
SHIPPING
STANDARD
Standard & Optional Mold Base Features STANDARD SHIPPING 159
American Mold Base Features and Delivery Time
5
5
S STANDARD SHIPPING 5-DAY SHIPPING 5-DAY SHIPPING

5 5-DAY SHIPPING 7 7-DAY SHIPPING 7 7-DAY 11-DAY SHIPPING SHIPPING 11-DAY SHIPPING

special mold bases shipping special mold bases shipping special mold bases shipping
in fiVe Working days in seVen Working days in eleVen Working days
7 7-DAY SHIPPING 11-DAY SHIPPING includes all features specified

includes all dme standard
in fiVe working days, plus:
mold bases #1, #2 and #3 steel includes all features specified in seVen working days, plus:
7
7
( /8" to 5 /8" thick) and #7 steel
( /8" to 2 /8" thick); and all
7
7
“no charge” items, plus:

Machine for and install guided ■ Machine for DME three-piece ■ Machine for DME parting
■
ejection – 2 or 4 places extension bushings line interlocks
■ Machine for and install support pillars ■ Drill and tap horizontal water lines ■ Provide special thickness plates
(maximum plate thickness
■ Machine for and install additional ■ Drill water pipe clearance holes of 5 /8" in DME #1, #2 and
7
stop pins ■ Drill vertical water lines (excluding #3 steels, and 2 /8" in DME
7
■ Machine press knock-out in bottom o-ring machining) #7 steel)
clamp plate (tap in ejector bar, if ■ Machine for DME angle pin inserts ■ Provide special plate lengths
required)
■ Finish mill/bore cavity and core and widths within DME Standard & Optional Mold Base Features | American Mold Base Features and Delivery Time
■ Machine pry bar slots pocket; blind or through standard size offerings
1
Machine leader pin vent slots in rails (NOTE: /2" minimum radius required)
■ ■ Angle pin machining and
■ Machine for spring holes clearance (maximum 4)
■ Drill and tap lifting holes ■ Ejector pin machining –
3
maximum of 25 pins ( /16"
■ Drill and tap mold strap holes minimum diameter ejector pin;
(location ± /32") 2 /8" maximum plate thickness)
1
7
■ Machine for and install extra
■ Side interlock machining
assembly screws in top and/or
bottom
Machine for and install extra
■
assembly screws in ejector assembly

■ Machine for and install added
return pins

■ Rough mill/bore cavity and core
1
pocket; blind or through (NOTE: /2"
minimum radius required)

U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net