Page 154 - Mold Bases & Plates 2020

Standard & Optional Mold Base Features
162

Guided Ejection Systems
S STANDARD SHIPPING

5 5-DAY SHIPPING Guided Ejection Systems hold the ejector assembly in alignment and support the weight
of the ejector assembly throughout the molding cycle – greatly reducing wear on ejection
components and preventing cocking of the ejector assembly.

7 7-DAY SHIPPING for quoting or system 1 system 2
SHIPPING
11-DAY
ordering, sPecify:
guided ejection
system type When pins are installed in the support Pins installed in the ejector housing
plate, the ejector housing can be removed
permit fast installation. When the
❑ System 1 from the mold without removing ejector ejector housing is removed from the
❑ System 2 plates. This permits easy access to service mold base, the complete ejector
assembly is removed.
the ejector system.
Quantity (2 or 4): _________
Standard & Optional Mold Base Features | Guided Ejection Systems
guided ejection
bushing type

❑ Bronze-Plated Steel Leader pin Leader pin
Leader pin
Leader pin
Bushings
❑ Self-Lubricating Bushings

guided ejection ejector ejector ejector support ejector ejector ejector support
ejector ejector
ejector ejector
ejector support
ejector support
Housing plate retainer plate Housing plate retainer plate
Housing plate
retainer plate
Housing plate
retainer plate
Position: plate plate plate plate
❑ std ❑ specify system 1 system 2
system 2
system 1
Recommended position from
table provided standard (see
opposite page). If a different
position is required, specify
below.
GEx____________
GEy____________
diameter:
❑ std ❑ specify
Recommended diameter from
table provided standard. If a
different diameter is required,
it will require a positioning
change; specify below.

Available diameters:
❑ 0.750
❑ 0.875
❑ 1.000
❑ 1.250

U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net