Page 27 - Mold Bases & Plates 2020

Special Mold Bases & Plates
27

Quick Delivery Special Features
S STANDARD SHIPPING

5 5-DAY SHIPPING Special Mold Bases Shipping in FIVE Working Days

Includes all DME Standard Mold Bases #1, #2 and #3 steel ( /8" to 5 /8" thick) and
7
7
7
7
#7 steel ( /8" to 2 /8" thick); and all “no charge” items, plus:
7 7-DAY SHIPPING 11-DAY SHIPPING • Machine for and install guided ejection – • Drill and tap safety strap holes
2 or 4 places
(location ± /32")
1
• Machine for and install support pillars • Machine for and install extra assembly
screws in top and/or bottom
• Machine for and install additional stop pins • Machine for and install extra assembly
• Machine press knock-out in bottom clamp
S plate (tap in ejector bar, if required) screws in ejector assembly
STANDARD
SHIPPING
• Machine pry bar slots • Machine for and install added return pins
5
• Machine leader pin vent slots in rails • Rough mill/bore cavity and core pocket;
SHIPPING
1
blind or through (NOTE: /2" minimum
5-DAY
• Machine for spring holes radius required)
• Drill and tap lifting holes
7 7-DAY SHIPPING Special Mold Bases Shipping in SEVEN Working Days
SHIPPING
11-DAY

Includes all features specified above in five working days, plus: Special Mold Bases & Plates | Quick Delivery Special Features

S STANDARD SHIPPING • Machine for DME three-piece • Drill vertical water lines (excluding
o-ring machining)
extension bushings
• Drill and tap horizontal water lines • Machine for DME angle pin inserts
5 5-DAY SHIPPING • Drill water pipe clearance holes • Finish mill/bore cavity and core pocket;

blind or through (NOTE: /2" minimum
1
radius required)

7 7-DAY SHIPPING 11-DAY SHIPPING Special Mold Bases Shipping in ELEVEN Working Days

Includes all features specified above in seven working days, plus:

• Machine for DME parting line interlocks • Angle pin machining and clearance
(maximum 4)
• Provide special thickness plates
(maximum plate thickness of 5 /8" in • Ejector pin machining – maximum of
7
3
7
DME #1, #2 and #3 steels, and 2 /8" 25 pins ( /16" minimum diameter ejector pin;
in DME #7 steel) 2 /8" maximum plate thickness)
7
• Provide special plate lengths and widths within • Side interlock machining
DME standard size offerings

U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net