Page 36 - Mold Bases & Plates 2020
P. 36
A-Series Mold Bases
44
American Mold Base Standard Features
The Locating Ring Clamp Slots facilitate
aligns the mold base clamping the mold to
to the stationary the platen of the press.
platen side of DME mold bases offer
the press and four slot types to ensure
positions the sprue the best fit for the
bushing correctly. requirements of
your application.
Locating Rings Clamp Slots
A-Series Mold Bases | American Mold Base Standard Features
The Sprue Bushing Leader Pins and Bushings
provides a seat at align both halves of the
the spherical radius mold at the parting line.
for the nozzle of Leader Pin Vents, which
the press. This allow trapped air to
provides a path escape from the mold,
for the material are designed into all
from the nozzle to 15-inch-and-wider series
Sprue Bushings the runner system. Leader Pins, Vents molds. When desired,
and Bushings they can be specified
on smaller molds.
“L”
UAS-X6 UAS-X1
Assembly screws UAS-X5 UAS-X2
are used to hold UAS-X4 UAS-X3
the plates
of the upper and
lower halves Offset (1)
of the mold UAS-Y
together. For
simplicity, the
Upper and Lower upper and lower
Assembly Screws assembly screws UAS-Y
are generally
placed in
similar positions.
UAS-X10 UAS-X9
UAS-X11 UAS-X8
UAS-X12 UAS-X7
“A” half of mold inverted
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
