Page 41 - Mold Bases & Plates 2020

Mold Bases
49
DME American Standard Mold Base
Quote Request Form

Page Company Name:: _______________________________________ Date: _________________
2 of 2
Additional Features – Ships in 5 Working Days
Guided Ejection:
Quantity: ____________ Pin Dia.: ___________ ■ System 1 ■ System 2
■ Recommended Position ■ Custom Position: GEx ____________ GEy ___________
■ Bronze Bushing ■ Self-Lubricating Bushing __________________________
Pry Slots: (4 places each plate) Lift Holes: (Prints required if not on center)
ELECTRONIC
QUOTE REQUEST (NOTE: P = Parting Line NP = Non Parting Line) ■ TCP: Quantity __________ Dia. __________
FORM ■ TCP: P ______ NP ______ ■ A Plate: Quantity __________ Dia. __________
■ A Plate: P ______ NP ______ ■ B Plate: Quantity __________ Dia. __________
■ B Plate: P ______ NP ______ ■ Support Plate: Quantity __________ Dia. __________
■ Support Plate: P ______ NP ______ ■ Housing:
■ Housing: P ______ NP ______ ■ ____________: Quantity __________ Dia. __________
■ ___________ P ______ NP ______ ■ On center ______________________________________
■ Leader Pin Vents:
(NOTE: Designed in all 15" and wider mold bases. When desired, can be specified on smaller molds.)
■ Rough Rectangular Pockets: (Prints required) Length ______ Width ______
■ Through ■ Blind (specify depth): _______ Corner Radius (.50 min/1.00 max): ____________
(NOTE: Rough Pocket tolerance -.062 per side)
■ Knock-out Holes: (Prints required if not on center) Drill Quantity ______ Tap Quantity ________
■ Mold Strap Holes: (Prints required) Quantity ______
■ Spring Pockets: (Prints required) Quantity ______ Number of Plates ________
■ Support Pillars: (Prints required) Quantity ______ Diameter _______________ Style ______________

Additional Components: (Prints required)
■ Lower Assembly Screws: Quantity ____________ Comments: ____________________
■ Upper Assembly Screws: Quantity ____________ _____________________________
■ Ejector Assembly Screws: Quantity ____________ _____________________________ Mold Bases | DME American Standard Mold Base Quote Request Form
■ Return Pins: Quantity ____________ _____________________________
■ Stop Pins: Quantity ____________
Additional Features – Ships in 7 Working Days (includes features listed in 5 working days)

■ Extension Bushing (T-Series):
Extension Bushing Item Number: ___________________ Stripper Bushing: TEB-0001

■ Finished Rectangular Pockets: (Prints required) Length ____________ Width ____________
■ Through ■ Blind (specify depth): ________ Corner Radius (.50 min/1.00 max): _______________
(NOTE: Finished pocket tolerance +/- .001)
■ Waterlines: (Prints required) Comments: ____________________
Diameter: ____________ _____________________________
Number of Plates with Waterlines: ____________ _____________________________
Total Length of Waterlines (in inches) in Each Plate: ____________
Number of Sides: ____________ _____________________________
Additional Features – Ships in 11 Working Days (includes features listed in 7 working days)

■ Special Plate Thickness: Comments: ____________________
Plate to be altered: ____________ Thickness: ____________ _____________________________
■ Parting Line Interlocks (see Mold Components catalog; Print required): _____________________________
Quantity: ____________ _____________________________
Part Numbers: _____________________________
For additional work, contact Customer Service at 800-626-6653 or email drawing files to dme_cad@dme.net

U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net