Page 180 - Parker - Hydraulic and Lube Filtration Products

Portable Filter Carts

Applications

• Filtering new fl uid before Parker portable fi lter carts are Once water comes into contact
putting into service the ideal way to prefi lter and with this material, it is removed
transfer fl uids into reservoirs or from the system.
• Transferring fl uid from
drums or storage tanks to to clean up existing systems. The Parker portable fi lter
system reservoirs
Fluid should always be fi ltered cart uses two high capacity
• Conditioning fl uid that is before being put into use. New ModuFlow™ Plus fi lters for long
already in use fl uid is not necessarily clean element life and better system
fl uid. Most new fl uids (right out protection. The fi rst stage (inlet)
• Complimenting existing
system fi ltration of the drum) are unfi t for use fi lter captures larger particles,
due to high initial contamination while the second stage (outlet)
• Removing free and levels. Contamination, both fi lter captures fi ner particles
emulsifi ed water from a particulate and water, may be or removes water. A rugged
system added to a new fl uid during industrial quality gear pump gets
• For use with fl uids such as processing, mixing, handling and the job done fast.
hydraulic, gear and lube oils storage.
Using a Parker portable fi lter
Water is removed by installing cart is the most economical way
Par-Gel™ elements in the outlet to protect your system from the
fi lter. Par-Gel™ elements are harm that can be caused by
made from a polymer which has contamination.
a very high affi nity for free water.

Features Advantages Benefi ts

• Two fi lters instead of one • Pump protection and long • Element cost savings and
w/ 2.5 times increased dirt element life trouble-free service
holding capacity

• Wide variety of particulate • Capable of getting a fl uid to • Extends fl uid life and system
elements available a desired cleanliness level performance

• Par-Gel™ water removal • Removes “free water” from a • Gets dirt and water out of
elements available system system with one process

• Heavy duty frame • Rugged and durable • Built to last

• Lightweight and portable • Easy to move from • One person operation
place-to-place

• Two fl ow rates available: • Enables use in low or high • Matched to your needs
5 gpm or 10 gpm viscosity applications

• Eleven-foot hose and wand • Additional hardware not • Ready to use as received
assemblies included necessary

175