Page 34 - Parker - AC890/AC890PX series

Accessories and Options

AC890/AC890PX Series
Table of Contents

Category Page
Operator Interface
While every AC890 and AC890PX series drive is shipped with a keypad/display,
there are several options available such as a remote keypad kit and a full featured 67
graphical display. In addition, the TS8000 series HMI is fully compatible with the
AC890 and AC890PX series.
Accessories - Common Bus
The AC890 series is a natural for common bus applications. Frames B-D can be
mounted side by side, and include convenient accessible clamp terminals for
bus connections, as well as bus adapters to connect additional rows of drives. 67
For convenience, we offer quality bus bar stock and related accessories so that
eveything is guaranteed to fit.
Options Cards - Communication
A wide variety of communications cards allow the AC890 and AC890PX series
drives to interface with most current and legacy SCADA networks, using both 68
open architecture and proprietary standards. Other cards allow multiple drives to
communicate with each other, peer to peer. Field or factory installed.
Options Cards - Feedback
Since the AC890 family is compatible with such a wide variey of motor types, a
number of feedback option cards are offered. Choose from a number of encoder 70
and resolver options to match the feedback device on your motor or process line.
Field or factory installed.
Option Cards - I/O
Even though the AC890 family comes standard with extensive I/O, certain
applications have special requirements. For these, we offer option cards that will 71
accept “master encoder” inputs, registration mark signals, and high resolution
analog references. Field or factory installed.
Accessories - Mounting and Wiring
The unique design of the AC890 frame B-D accommodates ductwork and forced air
ventilation, and we offer the hardware required in the form of duct and fan kits. For 74
ease of wiring, several pre-manufactured cables are offered.
Accessories - Dynamic Braking
All AC890 drives include braking logic and transistor, but since not every application
requires dynamic braking, the resistor assemblies are optional. Braking kits include 75
overload
Accessories - Software Tools
For drive configuration and programming 106
Accessories - Power Quality
Pre-selected line/load reactors and EMC filters can be provided for the AC890 112
family.

34