Page 10 - Wago_ThePluggableConnectionSystem_Volume5_2015_US.pdf
P. 10
®
1 WINSTA MINI, 890 Series
Handling:
8
Preparation Termination via CAGE CLAMP S Strain relief installation
®
1. Strip length, outer insulation = x mm 1 To terminate fine-stranded conductors, open clamping unit Latch wired connector onto the base of the strain relief
2. Strip length = 9 mm via 2.5 mm screwdriver and insert stripped conductor until housing.
3. Extended ground conductor = 8 mm it hits backstop.
Solid conductors can be connected via push-in termination.
Conductor termination with . . .
To terminate fine-stranded conductors, open clamping units
via 890-382 Operating Tool and insert stripped conduc-
tors until they hit backstop.
Solid conductors can be connected via push-in termination.
. . . operating tool
To terminate fine-stranded conductors, open clamping units
via 890-383 Operating Tool and insert stripped conduc-
tors until they hit backstop.
Solid conductors can be connected via push-in termination.
Shield termination
Connector with shield termination Apply the shield to the rubber cable. Push the shield connecting plate into the connector until fully
Strip length, outer insulation = 30 mm inserted.
Shield length = 8 mm
1 Strip length, outer insulation: 2-pole = 30 mm, 3-pole = 37 mm, 4- and 5-pole = 45 mm
