Page 11 - Wago_ThePluggableConnectionSystem_Volume5_2015_US.pdf

! 1

9

1

Push down strain relief clamp by hand. Push down strain relief clamp via 2.5 mm screwdriver Latch the top of the strain relief housing.
alternately on both sides.

Mounting plate installation

Securing the mounting plate via fixing pins.

Snapping on distribution connector

The distribution connectors snap together when attached
to the mounting plate.

Locking lever assembly Marking

First insert wired connector into strain relief housing, then All connectors (snap-in versions, distribution connectors) for fixed The printed marking of the connector is clearly visible in
snap clamp and cover. installations are factory-equipped with locking levers to ensure the openings of the strain relief housing.
plugs and sockets are securely locked. Additional locking levers
are only required for “flying leads” (plug/socket).

WINSTA — perfectly plugged!
®