Page 5 - Parker - Isysnet serial bus system selection guide
P. 5

Isysnet     3

            Selecting  a  Network
            You can configure your system for information exchange between a range of devices and computing platforms and operating
            systems.
             Application Requirements                                 Network                      Select
             • Plant management (material handling)
             • Configuration, data collection, and control on a single,
              high-speed network                                     EtherNet/IP                 PSSCENA
             • Time-critical applications with no established schedule
             • Data sent regularly
             • Internet/Intranet connection
             • High-speed transfer of time-critical data between
              controllers and I/O devices
             • Deterministic and repeatable data delivery
             • Media redundancy                                      ControlNet                  PSSCCNA
             • Controller redundancy
             • Intrinsic safety
             • Redundant controller systems
             • Connections of low-level devices directly to
              plant-floor controllers, without interfacing them
             • Data sent as needed                                                              PSSCDM12A
             • More diagnostics for improved data collection and      DeviceNet                PSSCDM18PA
              fault detection
             • Less wiring and reduced start-up time than a traditional,
              hard-wired system

             • Connecting to an existing PROFIBUS DP 5m bus,
              12 MB network                                          PROFIBUS                    PSSCPBA






            Selecting the DeviceNet Communication Interface
            Isysnet offers two interfaces for connecting to DeviceNet. Refer to the following table.
              For These Features                 Remember                            Select

             • Behaves as a slave device on the Main  • All Isysnet modules count as a single  PSSCDM12A (M12-style network
              Network and a master on the PointBus  node on the Main Network         connectors)
             • Allows a group of I/O modules on the  • The Main Network distance     PSSCDM18PA (mini-style network
              Subnet to act as a single node on the  is acceptable                   connectors with pass-through)
              Main Network
                                                • Isysnet expansion power supplies are
             • RSNetWorx™ for DeviceNet software  permitted to add more Isysnet modules.
              is needed for configuration of the
              PSSCDM12A or PSSCDM18PA
              on the Main Network and the PointBus
             • Configuration on the PointBus consists
              of a scan list that is very similar to
              those used in all of the DeviceNet
              master scanner modules



                                                                             Publication PSS-SG001A-EN-P – June 2005
   1   2   3   4   5   6   7   8   9   10