Page 39 - Parker- Parker global air preparation system
P. 39
Catalog 0750-3 US P32 Series
Global Air Preparation System Compact Common P1 Regulators
Specifications Flow Charts
Flow capacity* 1/4 30 dm /s (64 scfm) P32 Common Port Regulator
3
3/8 30 dm /s (64 scfm)
3
3
1/2 30 dm /s (64 scfm) 10 Inlet Pressure - 10 bar (145 psig)
140
Operating temperature -25°C to 65.5°C (-13°F to 150°F) 120 9 8
Max. supply pressure 20 bar (300 psig) 100 7
Adjusting range pressure 0-2 bar (30 psig) 80 6 5 8.0 bar
0-4 bar (60 psig) Secondary Pressure - (psig) 60 Secondary Pressure - bar 4 6.3 bar 116 psig
0-8 bar (125 psig) 40 3 4.0 bar 91.4 psig
0-17 bar (250 psig) 20 2 58 psig
1 2.5 bar
Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2 0 0 36.3 psig
0 10 20 30 40 50 60 70 80 90
3
Gauge port (2 ea.) BSPP / BSPT / NPT 1/4 Flow - dm /s
0 20 40 60 80 100 120 140 160 180
Weight 0.50 kg (1.10 lbs) Flow - (scfm)
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
Material Specifications
Body Aluminum
Adjustment knob Acetal
Bonnet 33% Glass-filled nylon
Diaphragm assembly Nitrile / Zinc Repair and Service Kits
Valve assembly Brass / Nitrile Regulator repair kit - relieving P32KB00RB
Springs Main regulating valve Steel S.S. Regulator repair kit - non-relieving P32KB00RC
Seals Nitrile Panel mount nut - aluminum P32KA00MM
Panel nut Acetal
Panel mount nut - plastic P32KA00MP
Angle bracket (attaches via panel nut) P32KB00MR
Dimensions mm (inches) T-bracket with body connector P32KA00MT
NOTE: 48 mm (1.90 in.) hole required T-bracket P32KA00MB
for panel nut mounting.
60 Body connector P32KA00CB
(2.36)
60 30
(2.36) (1.18)
38.5
(1.52)
73.8 Gauges
(2.91)
50mm (2") Round 1/4" center back mount
136.1
(5.36) 0-30 psig / 0-2 bar K4520N14030
0-60 psig / 0-4 bar K4520N14060
0-160 psig / 0-11 bar K4520N14160
0-300 psig / 0-20 bar K4520N14300
Square flush mount gauge
0-4 bar K4511SCR04B
! WARNING 0-11 bar K4511SCR11B
0-60 psig K4511SCR060
Product rupture can cause serious injury.
Do not connect regulator to bottled gas. 0-160 psig K4511SCR160
Do not exceed Maximum primary pressure rating. Square with adapter kit
CAUTION: 0-4 bar P6G-PR10040
REGULATOR PRESSURE ADJUSTMENT – The working range of knob 0-11 bar P6G-PR10110
adjustment is designed to permit outlet pressures within their full range. 0-60 psig P6G-PR90060
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial 0-160 psig P6G-PR90160
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing For best performance, regulated pressure should always be set by increasing the
the pressure up to the desired setting. pressure up to the desired setting.
39 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/globalfrl