Page 119 - Parker - Process filtration

Trufl uor ™

SPECIFICATIONS Housing Differential Pressure vs. Liquid Flow Rate
Materials of Construction
Head and Bowl: High purity PFA Flow Rate (lpm)
0 10 20 30 40 50
O-Ring: FEP Encapsulated Viton ® 1
60
NPT Plugs: High purity PFA 0.9
0.8
Threaded Head 50
Inserts: PTFE coated 316 0.7
Stainless steel 0.6 40
Connections Differential Pressure (psid) 0.5 30 Differential Pressure (mbar)
Inlet | Outlet: ¾" NPT or Butt Weld 0.4
Vent and Drain: ¼" NPT 0.3 20
Maximum Operating Specifi cations
TFH (PFA): 0.2 10
65psid (4.5bar) @ 203ºF (95ºC) 0.1
75psid (5.2bar) @ 68ºF (20ºC) 0 0
0 2 4 6 8 10 12 14
TVH (PVDF): Flow Rate (gpm)
110psig @ 203ºF (95ºC)
150psig @ 68ºF (20ºC)

Cartridge Confi gurations Supported
Size Description Minimum
Overall Overall Clearance
222 | Flat End Cap
10˝ Width (A) Length (B) for Cartridge
SS Reinforced 222 | Flat End Cap Housing Part#
Removal
Inches cm Inches cm Inches cm
7
TFH10N08N02T 4- ⁄ 8 12.4 16 40.6 13 33.0
TFH10W08N02T 7- ⁄ 32 19.4 16 40.6 13 33.0
21
7
TVH10N08N02T 4- ⁄ 8 12.4 16 40.6 13 33.0
TVH10W08N02T 7- ⁄ 32 19.4 16 40.6 13 33.0
21

This housing is not recommended for compressed air or gas service. It is suitable for use with fully compatible liquids
(which do not soften, swell or adversely affect the product or its materials of construction) only. This housing is not
recommended for acid service at the pressure shown.
Please contact Parker for detailed compatibility information.
NOTE:
Use of this product in a manner other than in accordance with Parker’s current recommendations may lead to injury
Notes: or loss. Parker cannot accept liability for such injury or loss.
1. Dim. A1 = ¾˝ Butt-weld
Dim. A2 = ¾˝ NPT
Ordering Information

08 02 T

Model Bowl Length Connection Type Connection Size Drain/Vent Type Drain/Vent Size Seal Material
CODE DESCRIPTION CODE INCHES (mm) CODE DESCRIPTION CODE INCHES (mm) CODE DESCRIPTION CODE INCHES (mm) CODE DESCRIPTION
TFH Trufl uor PFA 10 10˝ N NPT 08 ¾˝ N NPT 02 ¼˝ (6.35mm) FEP
T Encapsulated
TVH Trufl uor PVDF W Butt -weld W Butt-weld Viton ®

Specifi cations are subject to change without notifi cation. © 2010 Parker-Hannifi n Corporation
For User Responsibility Statement, see www.parker.com/safety domnick hunter Process Filtration - North America
All Rights Reserved
Trufl uor is a registered trademark of Parker-Hannifi n Corporation
Viton is registered trademark of E.I. DuPont de Nemours & Co., Inc.
DS_IP_Trufl uor Rev. A
119