Page 132 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

PCB Terminal Blocks with Push-Buttons, 0.5 mm , 1 In-Line Solder Pin/Pole, Front Side
2
1 Pin Spacing: 2.5 mm
130 250 Series
● Compact PCB terminal blocks with push-buttons
● Version with in-line solder pins

● Push-in termination of solid conductors

● Push-button operation for connecting of fine-stranded conductors
and removing of conductors
● 45° conductor entry angle provides easy, space-saving wiring

● Custom color combinations

● PCB terminal blocks also available with spacers upon request

Technical data:

Pin Spacing 2.5 mm Current-Carrying Capacity Curve
0.098 in. Pin spacing: 2.5 mm / Conductor size: 0.5 mm “f-st”
2
Ratings per IEC/EN 60664-1 Based on: EN 60512-5-2 / Reduction factor: 1
Overvoltage category III III II
Pollution degree 3 2 2 Current in A
Rated voltage 100 V 160 V 320 V
Rated surge voltage 2.5 kV 2.5 kV 2.5 kV 8
Nominal current 4 A 4 A 4 A
Approvals per UL/CSA 6
Use group UL1059 B C D
Rated voltage – – – 4
Nominal current UL – – –
Nominal current CSA – – – 2
Conductor and solder pin data: 0
Connection technology CAGE CLAMP S 10 20 30 40 50 60 70 80 90 100105
®
Conductor size: solid 0.14–0.5 mm (0.4–0.8 mm Ø) Ambient operating temperature in °C
2
Conductor size: fine-stranded 0.2–0.5 mm 2 2-, 4-, 6-, 12-, 24-pole Nominal current for terminal strip
AWG 24–20 (26 “sol.”
Strip length 8.5–9.5 mm / 0.32–0.36 in.
Conductor entry angle 45° to PCB
Solder pin: length/width 3.6 mm / 0.4 x 0.75 mm
Solder pin: drilled hole diameter 1.1 - 0.1 mm

Material data: 250 Series accessories: Pages:
Material group I
Insulating material Polyamide 6.6 (PA 6.6) Marking accessories 570 – 573
Flammability rating per UL 94 0V Operating tools 556 – 559
Lower/Upper limit temperature -60 °C / +105 °C Test pin 568
Clamping spring material Copper alloy
Contact plating tin-plated

Additional approvals and corresponding ratings can be found at www.wago.com. For additional technical information, see Section 13.