Page 26 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

PCB Terminal Strips 2.5 mm , THR (Through-Hole Reflow*)
2
1 Pin Spacing: 5 mm
24 236 Series
● Terminal strips made of high-temperature resistant plastic are suitable
for SMT reflow soldering
● Tape-and-reel packaging

● Double solder pins for high mechanical stability

Technical data:

Pin Spacing 5 mm Current-Carrying Capacity Curve
0.197 in.
2
Ratings per IEC/EN 60664-1 Pin spacing: 5 mm / Conductor size: 2.5 mm “f-st”
Based on: EN 60512-5-2 / Reduction factor: 1
Overvoltage category III III II
Pollution degree 3 2 2 Current in A
Rated voltage 200 V 320 VDC320 VDC 45
Rated surge voltage 4 kV 4 kV 4 kV 40
Nominal current 24 A 24 A 24 A 35
Approvals per UL/CSA 30
Use group UL 1059 B C D 25
Rated voltage 300 V – 300 V 20
Nominal current UL 15 A – 10 A 15
Nominal current CSA 15 A – 10 A 10
5
Conductor and solder pin data:
Connection technology CAGE CLAMP ® 0 10 20 30 40 50 60 70 80 90 100105
Conductor size: solid 0.08–2.5 mm 2 Ambient operating temperature in °C
Conductor size: fine-stranded 0.08–2.5 mm 2 2-, 4-, 6-, 12-, 24-pole Conductor rated current
Conductor size: fine-stranded 0.25–1.5 mm 2 (with insulated ferrule)
Conductor size: fine-stranded 0.25–1.5 mm 2 (with uninsulated ferrule)
AWG 28–12 (12: THHN, THWN)
Strip length 5–6 mm / 0.20–0.24 in.
Conductor entry angle 45° to PCB
Solder pin: length/width 3.6 mm / 0.7 x 0.7 mm
Solder pin: metal plated hole Ø 1.1 +0.1 mm
Material data: 236 Series accessories: Pages:
Material group III a
Insulating material Nylon 4.6 (PA 4.6) Marking accessories 570 – 573
Flammability rating per UL 94 V2 Operating tools 556 – 559
Lower/Upper limit temperature -60 °C / +115 °C Test plug module 204
Clamping spring material Chrome nickel spring steel (CrNi)
Contact material Electrolytic copper (E )
Cu
Contact plating tin-plated

Additional approvals and corresponding ratings can be found at www.wago.com For additional technical information, see Section 13.
*For THR soldering, see page 81.