Page 452 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

Male Headers with 1 x 1 mm and 1.2 x 1.2 mm Solder Pins, THR (Through-Hole Reflow*)
6 Pin Spacing: 7.5 mm
450 MCS MIDI Classic
● THR male headers for reflow soldering in SMT production

● Available in tape-and-reel packaging for automated pick-and-place
assembly

● Also available in bulk packaging for manual placement

● Male headers may be mounted horizontally or vertically
● With coding keys

Technical data: 1 x 1 mm 1.2 x 1.2 mm

Pin Spacing 7.5 mm 7.5 mm Derating Curve
0.295 in. 0.295 in. 231-202/026-000 female connector
Ratings per IEC/EN 60664-1 IEC/EN 60664-1 with 231-832/001-000/105-604 male header
Overvoltage category III III II III III II Pin spacing: 7.5 mm / Conductor size: 2.5 mm “f-st”
2
Pollution degree 3 2 2 3 2 2 Based on: EN 60512-5-2 / Reduction factor: 0.8
Rated voltage 500 V 630 V 1000 V 500 V 630 V 1000 V Current in A
Rated surge voltage 6 kV 6 kV 6 kV 6 kV 6 kV 6 kV 45
Nominal current 12 A 12 A 12 A 16 A 16 A 16 A 40
Approvals per UL/CSA UL/CSA 35
Use group UL 1059 B C D B C D 30
Rated voltage – – – – – – 25
Nominal current UL – – – – – – 20
Nominal current CSA – – – – – – 15
The MCS MIDI connection system is UL 1977 approved and capable of up to 600 V for factory wiring. 10
5
Solder pin data: 0
Solder pin: length/width 2.4 mm /1 x 1 mm 10 20 30 40 50 60 70 80 85
Solder pin: drilled hole diameter 1.4 +0.1 mm Ambient operating temperature in °C
2-, 4-, 6-, 12-pole Conductor rated current
Solder pin: length/width 2.4 mm / 1.2 x 1.2 mm
Solder pin: drilled hole diameter 1.7 +0.1 mm

For other pin lengths, please contact factory.
Material data: MCS-MIDI Classic accessories: Pages:
Material group I
Insulating material Glass-fiber-reinforced polyphthalamide (PPA-GF) Fixing elements 473
Flammability rating per UL 94 0V Separators 472
Lower/Upper limit temperature -60 °C / +100 °C Coding keys 472
Contact material Electrolytic copper (E )
Cu
Contact plating tin-plated
MCS connectors are also available upon request with gold-plated or partially gold-plated contact surfaces.
Depending on the version requested, “item no. suffix . . . /010-000” is added to the “basic item no.”

MCS — MULTI CONNECTION SYSTEM includes connectors without breaking capacity in accordance with
DIN EN 61984.
When used as intended, these connectors shall not be connected/disconnected when live or under load. The circuit
design should ensure header pins, which can be touched, are not live when unmated.

*For THR soldering, see page 405. **UL/CSA approval pending Additional approvals and corresponding ratings can be found at www.wago.com.
For additional technical information, see Section 13.