Page 99 - Parker - Pressure Control Valves
P. 99

Catalog HY15-3502/US                              D.A., N.C. Sequence Valve (External Pilot)
                   Technical Information                             Series SV105

            CV
                   General Description
                   Direct Acting, Normally Closed
                   Sequence Valve (Externally Piloted).
              Check
            Valves
            SH     With no pressure at the pilot port
                   (port 1), both port 3 and port 2 are
                   blocked. When the pilot pressure at port 1
                   exceeds the valve setting, the spool moves opening a
              Shuttle
                   path and allowing flow from port 3 to port 2. This valve
            Valves
            LM
                   internally drains the spring chamber to tank via the
                   sequencing port, thus any backpressure on port 2
                   would be additive to the spring setting.
              Load/Motor
            Controls
            FC                                                                    (3)
                   Features                                               (1)                        (3)
                   •  Hardened, precision ground parts for durability
                   •  Internal mechanical stop limits spool travel eliminating    (2)                (2)
              Flow
            Controls
            PC       spring solidification
                   •  “D”-Ring eliminates backup rings                                                   (1)
                   •  All external parts have yellow zinc dichromate. This
                     coating is ideal for salt spray applications.
            Controls
              Pressure
            LE     •  Fast response                                    Performance Curve
                                                                       Flow vs. Inlet Pressure
                                                                       (Pressure rise through cartridge only)
                   Specifications
            Elements
              Logic
                                                                          PSI  Bar     Hydraulic Oil 150 SSU @ 100°F (32 cSt)
            DC                                                           100  6.9
                    Rated Flow        38 LPM (10 GPM)
                    Maximum Inlet     250 Bar (3600 PSI)                 P)  75  5.2
                    Pressure
              Directional
            Controls
            MV                                                                                   Fully Open 3 to 2
                    Maximum           138 Bar (2000 PSI)                  50  3.4
                    Pressure Setting                                     Pressure Drop (
              Manual
                    Leakage at        82 cc/min. (5 cu. in./min.)
            Valves
            SV      150 SSU (32 cST)  at 210 Bar (3000 PSI)               25  1.7
                    Cartridge Material  All parts steel. All operating
                                                                            0
                                      parts hardened steel.
                                                                            LPM        7.6     15      23      30      38
                                                                               0
            Valves
              Solenoid
                                                                            GPM        2       4       6       8       10
            PV      Operating Temp.   -45°C to +93.3°C (“D”-Ring)                               Flow (Q)
                    Range/Seals       (-50°F to +200°F)
                                      -31.7°C to +121.1°C (Fluorocarbon)
                                      (-25°F to +250°F)
            Valves
              Proportional
            CE      Fluid             Mineral-based or synthetic with
                    Compatibility/    lubricating properties at viscosities
                    Viscosity         of 45 to 2000 SSU (6 to 420 cSt)
                    Filtration        ISO Code 16/13,
              Coils &
            Electronics
            BC                        SAE Class 4 or better
                    Approx. Weight    .45 kg (1.0 lbs.)
              Bodies &
                    Cavity            C10-3
            Cavities
            TD
                    Form Tool         Rougher   NFT10-3R
                                      Finisher  NFT10-3F
              Technical
            Data
                                                                   PC97                        Parker Hannifin Corporation
                                                                                               Hydraulic Cartridge Systems
   94   95   96   97   98   99   100   101   102   103   104