Page 13 - Parker - PGP/PGM500 Series

Catalog HY09-0500/US PGP/PGM500 Series
PGP/PGM511 Porting Single or Multiple Aluminum Pumps & Motors

PGP/PGM 511 Porting Code G1 T1
Thread Dimensions
Code D D2 9/16"-18 UNF 12.7
SAE straight thread D3 3/4"-16 UNF 14.3
See table at right for specific port dimensions. D4 7/8"-14 UNF 16.7
D5 1 1/16"-12 UN 19.0
D6 1 5/16"-12 UN 19.0
D7 1 5/8"-12 UN 19.0

D8 1 7/8"-12 UN 19.0
Please note the bold, italicized items
reflect Parker preferred product options.

Notes: 1. Dimensions are in millimeters (inches).
2. Dimensions are nominal except where noted.
3. Subscript and/or superscript numbers are tolerances.

PGP/PGM 511 - Shaft Load Capacity

Code Description Style Torque Rating
A1 9T, 16/32 Pitch, 32L, SAE “A” Spline 86Nm/759in-lb
C1 11T, 16/32 Pitch, 38.2L, SAE 19-4 Spline 184Nm/1625in-lb
C2 11T, 16/32 Pitch, 32.2L, SAE 19-4 Spline 184Nm/1625in-lb
When applying a multiple section
K1 Ø 15.88 4.0 Key, no thread, 32L, SAE ”A” Parallel 75Nm/662in-lb pump, the maximum drive shaft
K4 Ø 15.88, 3.95 Key, no thread, 58.7L Parallel 75Nm/662in-lb load is determined by adding
the torque values for each
L1 Ø 17.46, 4.8 Key, 7/16UNF ext., 44.2L Parallel 112Nm/989in-lb
pumping section that will be
L6 Ø 19.05, 4.8 Key, no thread, 32L, SAE 19-1 Parallel 145Nm/1280in-lb simultaneously loaded.
Tandem pump Connecting Shaft Spline 110Nm/971in-lb

Displacement [in /rev] x Pressure [psi] Displacement [cc/rev] x Pressure [bar]
3
Torque [in-lb] = Torque [Nm] =
5.72 57.2

PGP/PGM 511 Drain Positions

Please note the bold, italicized items
reflect Parker preferred product options.

13 Parker Hannifin Corporation
Gear Pump Division
Kings Mountain, North Carolina USA