Page 5 - Parker - Bodies and Cavities

Catalog HY15-3502/US
Technical Tips Bodies and Cavities

CV
CARTPAK BODIES
Parker Cartpak sandwich mounted bodies are designed to be mounted under a standard ISO 4401-03, NFPA
D03, CETOP 3 size valve, and provide a multitude of different functions. The bodies are designed to accept a
Valves
Check
common 10 size cartridge valve allowing the designer the flexibility to use a single body to provide pressure,
SH
directional, flow, or load control. One or more Cartpak bodies may be “sandwiched” underneath a Parker D1
Series directional valve to provide the control functions for all portions of a hydraulic circuit. The ISO standard
fatigue rated bodies are available in either aluminum or ductile iron.
Valves
Shuttle
LM

Standard D03 Mount
Allows body to be mounted directly
under D03 valve reducing tube and
Controls
Load/Motor
FC pipe connections, resulting in fewer Coated Bodies
leak points.
11 Body Options Aluminum bodies are coated with clear
This provides a wide anodize for corrosion resistance. Steel
range of control options. bodies are coated with yellow zinc
dichromate providing protection from salt
spray and other corrosive elements.
Flow
Controls
PC
Controls
Pressure
LE

Elements
Logic
DC

Directional
Controls
MV
NFPA Fatigued Rated
Both aluminum and steel
bodies are NFPA fatigue
rated improving reliability.
Valves
Manual
Aluminum and Steel Bodies Common
SV Light weight aluminum bodies are 10 Size Cavities
available for low pressure Common cavities allow for a
applications. Durable steel bodies are wide range of functions to be
available for higher pressures. accomplished in a single body.
Solenoid
Valves
PV

Valves
Proportional
Catalog Pages: Each Cartpak catalog page is laid out example shown here, flow from the subplate in port P
CE
in a similar format and is designed to help you select is directed into the nose of the cartridge. The side port
the proper body for your application. In UPRIGHT of the cartridge is connected to the valve
the top left corner of the page there is a side of port P. Thus, you want to choose
VALVE SIDE
cartridges providing the function desired,
brief description and body schematic. P A B T
Electronics
Coils &
BC The body schematic shows and use the nose as the inlet. For
Gauge
the cartridge cavity and the ports instance, a FC101 meters flow from its
connecting to it. This schematic can be nose port to its side port and would be
used to understand which valves can be ideal for the p-port interrupt body shown.
Bodies &
Cavities
used in the body. For instance, in the
TD
P A B T
SUBPLATE SIDE
Technical
Data
BC3 Parker Hannifin Corporation
Hydraulic Cartridge Systems