Page 3 - Joyce - Stainless steel screw jacks

STAiNLESS STEEL JACKS ShAFT CODES

Instructions: Select the appropriate shaft codes for both right and left hand shafts. One shaft code must be specified for each side
of the jack.

Screw Stops (p. 10) and Boots (pp. 170-172) Mechanical Counters (p.177)
Stainless steel screw stops are optional on stainless steel jacks. When specified, CNT0=0.001" Increments
the closed height of the jack and the protection tube length may be increased. Note: Contact Joyce/Dayton
When boots are added to stainless steel jacks, the closed height of the jack may for availability and options.
be increased.

Hand Wheels (p. 177) Geared Potentiometers (p. 176) Encoders and Electronic Limit Switches
HW04=4" dia POTA=0-10V (IP65)
HW06=6" dia POTB=4-20MA (IP65) ENCX=Encoder (p. 178)
HW08=8" dia POTC=0-10V w/2 switches* ELS2=2 Position Electronic Switch
HW10=10" dia Recommended POTD=4-20MA w/2 switches* ELS4=4 Position Electronic Switch
for self-locking
HW12=12" dia jacks only. *Optional IP65 rating available. ELS6=6 Position Electronic Switch
Motors for Systems and Direct Drives (p. 185) Motors Motor Mounts (p. 185)
• All standard motors are 3-phase, 208-230/460 VAC Size Code Ordering Example:
or 230/460 VAC. Other motor options are available. 1/4 HP K
Specify the appropriate motor size from the chart 1/3 HP A mmA A
on the right. 1/2 HP B
• Refer to the “Additional Options” chart on the 3/4 HP C
preceding page as needed. 1 HP D
• Brake motors (M2) are recommended for jacks that 1-1/2 HP E MMA=56C Motor code from
are not self locking and jacks with double lead screws. 2 HP F
3 HP L MMB=140TC chart at left
• If the motor frequency will be varied to provide a
“soft” start, an inverter duty motor may be required. 5 HP G MMC=180TC
7-1/2 HP H MMD=210TC
10 HP I Standard motor adapters are aluminum.
15 HP J

Mechanical Limit Switches (pp. 174-175)
Ordering Example: LA13

Models Available Positions
Model Code 1 2* 3 4 5 6* 7 8
LS7-402 LI
Left
LS8-402 LA
Side
Shaft
LS8-404 LB Number of Options
DPDT Switches
LS9-502 LC (see p. 175)
LS9-503 LD
NOTE:
Will always be Right
LS9-504 LE
0 for LS7 models Side
LS9-505 LF Shaft
Options
LS9-506 LG
LS9-507 LH • 2, 5, 10, 15, and 20 ton stainless steel jacks are available with positions #1, #3, and #5.
• 25 ton stainless steel jacks are available with positions # 1, #4, #7, and #8.
*These positions are not standard. Contact Joyce/Dayton with your requirements.
Note: Limit switch housings are not stainless steel. Choose Steel It epoxy paint option instead.

Custom products are available • Contact Joyce/Dayton with your requirements 61
800-523-5204 sales@joycedayton.com joycedayton.com